Crack Initiation of Printed Lines Predicted with Digital Image Correlation

Processing Digital Image for Measurement of Crack Dimensions in Concrete

The elements of the concrete structure are most frequently affected by cracking. Crack detection is essential to ensure safety and performance during its service life. Cracks do not have a regular shape, in order to achieve the exact dimensions of the crack; the general mathematical formulae are by no means applicable. The authors have proposed a new method which aims to measure the crack dimen...

Biaxial High Cycle Fatigue of a Type 304L Stainless Steel: Cyclic Strains and Crack Initiation Detection by Digital Image Correlation

A series of biaxial High Cycle Fatigue tests at room temperature is performed to build up an extensive and well-documented database. The testing specimen is a maltese cross thinned in its centre with non homogeneous strain/stress fields. The experimental protocol uses exclusively full-field strain measurements. The strains (cyclic and residual) as well as the crack initiation detection are obta...

Fatigue crack growth in Haynes 230 single crystals: an analysis with digital image correlation

Fatigue crack growth was investigated in Haynes 230, a nickel-based superalloy. Anisotropic stress intensity factors were calculated with a least squares algorithm using the displacements obtained from digital image correlation. Crack opening/sliding levels were measured by analysing the relative displacement of crack flanks. Reversed crack tip plastic zones were calculated adopting an anisotro...

Digital Image Correlation

Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method

This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...