Crack initiation in filament composite tubes under lateral compression.
نویسندگان
چکیده
منابع مشابه
Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...
متن کاملQuasi-static Axial Compression of thin-walled Circular Composite Tubes
Assessing the behavior of composite structures which are subjected to impact loads is one of the important subjects in the field of mechanical sciences. Using thin-walled tubes which collapsed and absorbed the impact energy is a well-known method to prevent damages to the other parts of the structures. In this paper, deformations, crushing length, peak load, mean force and energy absorption cap...
متن کاملCompression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire
This paper presents an experimental investigation into the compression behavior of shape memory alloy hybrid composites (SMAHC) subjected to quasi-static loading taking into account of rotation effects of shape memory wire in basalt continuous filament (BCF) direct roving epoxy composite. Two types of specimen prepared, the BCF direct roving reinforced epoxy composite filled with shape memory w...
متن کاملA comparative Analysis of Experimental and Numerical Investigations of Composite Tubes under Axial and Lateral Loading
Quasi-static tests are performed in order to determine the crash behavior of composite tubes. The specimens are made from woven fiber carbon/epoxy. The crash experiments show that the tubes crushed in a progressive manner from one end to the other of the tubes while delamination was taking place between the layers. In the simulation works described in this paper the ANSYS explicit finite elemen...
متن کاملA Plasticity Criterion for Mixed Mode Fracture Initiation with Crack Surface Frictional Characteristics Under Compression
A new plasticity criterion for mixed mode crack initiation angles under compression is presented, based on the characteristics of the plastic core region surrounding the crack tip with crack surface friction. The shape and size of the plastic core region were thoroughly analyzed under compression and the non-dimensional variable radius of the plastic core region for mixed mode compressive fract...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1985
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.34.138