Crack initiation at V-notch tip subjected to in-plane mixed mode loading: An application of the fictitious notch rounding concept
نویسندگان
چکیده
منابع مشابه
The Effect of Inclined U-Notch Geometry on Mode Ratio (KII/KI) under Mixed Mode (I + II) Loading
In inclined U-notches, the mixed mode (I + II) loading occurs and the mode ratio can be increased by varying the notch angle. In this paper, the effect of the inclined U-notch geometry, i.e. the notch depth, the notch angle, the notch root radius, and the position of the notch with respect to supports, on the mode ratio (KII/KI) have been studied. Three-point bending and plane strain condition ...
متن کاملEnergy Release Rate Cannot Predict Crack Initiation Orientation in Domains with a Sharp V-notch Under Mode III Loading
The energy release rate (ERR) proposed by Irwin based on a theory by Griffith [1, 2] has been extensively used as a fracture criterion in 2D for brittle domains. Under in-plane mixed mode loading (modes I+II), the direction of crack initiation from cracks and sharp V-notches was determined by the orientation at which the ERR attains its maximum. Using the newly developed asymptotic expansion pr...
متن کاملMixed Mode Loading of an Interface Crack Subjected to Creep Conditions
Interface cracks are seldom subjected to pure Mode I or pure Mode II conditions. Station~y interface cracks between two distinct, bonded elastic-creep materials subjected to remotely applied mixed mode loading are simulated. The finite element method (FEM) is used to examine crack tip fields and candidate driving force parameters for crack growth. Plane strain conditions are assumed. In most ca...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملMultiple cracks in an elastic half-plane subjected to thermo-mechanical loading
An analytical solution is presented for the thermoelastic problem of a half-plane with several cracks under thermo mechanical loading using distributed dislocation technique. The uncoupled quasi-static linear thermoelasticity theory is adopted in which the change in temperature, if any, due to deformations is neglected. The stress field in a half-plane containing thermoelastic dislocation is ob...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2015
ISSN: 1971-8993
DOI: 10.3221/igf-esis.34.18