Crack growth study of dissimilar steels (Stainless - Structural) butt-welded unions under cyclic loads
نویسندگان
چکیده
منابع مشابه
Structural, Chemical and Deformation Changes in Friction Welded Joint of Dissimilar Steels
N. Ratković, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia. R. Nikolić, Faculty of Civil Engineering, University of Žilina, Žilina, Slovakia. I. Samardžić, University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia. Fundamental principles of friction welding of dissimilar steels (high speed and tempering steel) from the aspect of metallurgical and che...
متن کاملNumerical Crack Growth Analysis in AA2024-T3 Friction Stir Welded Butt Joints
This paper deals with a numerical investigation on the influence of residual stresses on fatigue crack growth in AA2024-T3 friction stir welded butt joints. The computational approach is based on the coupled usage of the finite element method (FEM) and the dual boundary element method (DBEM), in order to take advantage of the main capabilities of the two methods. Linear elastic FE simulations a...
متن کاملMicro-Study of Dissimilar Welded Materials
The dissimilar joint between aluminum/titanium alloys (Al 6082 and Ti G2) were successfully achieved by CO2 laser welding with a single pass and without filler material using the overlap joint design. Laser welding parameters ranges combinations were experimentally determined using Taguchi approach with the objective of producing welded joint with acceptable welding profile and high quality of ...
متن کاملHigh-temperature Fatigue Crack Growth Behavior of 17-4 Ph Stainless Steels
The fatigue crack growth (FCG) behavior was investigated for 17-4 PH stainless steels in three heat-treated conditions, i.e., unaged (Condition A), peak-aged (Condition H900), and overaged (Condition H1150), at temperatures ranging from 300 to 500 C. The high-temperature fatigue crack growth rates (FCGRs) of Condition H1150 were increased with an increase in temperature. However, for Conditions...
متن کاملMetastable phase solidification in electron beam welding of dissimilar stainless steels
Electron beam welds between dissimilar stainless steels with different solidification modes were studied with a view to elucidating the role of nucleation, cooling rate and direction of dendrite growth on the tendency towards metastable phase solidification. The results are compared with the solidification behaviour of levitation melted samples. It is demonstrated that with careful design, stai...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.04.318