Crack growth analysis in aluminium alloy plate (Al 2024 - T351) using finite element method
نویسندگان
چکیده
منابع مشابه
Fatigue of Friction Stir Welded 2024-T351 Aluminium Alloy
Fatigue failure characteristics of friction stir welds in 13mm gauge 2024-T351 plate have been assessed. Failure occurred from either the weld region (nugget/flow arm) or from the material immediately surrounding the weld. Fatigue failure from the surrounding material was essentially conventional, initiating from large S-phase intermetallic particles and growing in a macroscopic mode I manner. ...
متن کاملComposite Patch Repair of Central Crack Growth in Aluminium Alloy Plate
In this work, repaired crack in 6061T6 aluminum plate with composite patches presented, firstly we determine the displacement, strain and stress, also the first six mode shape of the plate, secondly we took the same model adding central crack initiation, which is located in the center of the plate, its seize vary from 20 mm to 60 mm and we compare the first results with second. Thirdly we repai...
متن کاملStress Ratio Effects on Crack Opening Loads and Crack Growth Rates in Aluminum Alloy 2024
Since its founding, NASA has been dedicated to the advancement of aeronautics and space science. The NASA Scientific and Technical Information (STI) Program Office plays a key part in helping NASA maintain this important role. The NASA STI Program Office is operated by Langley Research Center, the lead center for NASA's scientific and technical information. The NASA STI Program Office provides ...
متن کاملAccuracy Analysis of Extended Finite Element Method for Tension of Plate with a Central Crack
The accuracy of the Extended Finite Element Method (XFEM) in solving problems of straining plate with central crack is analyzed. Numerical solutions for displacements and stresses are compared with analytical solutions, while numerical solutions for stress intensity factor are compared with empirical solutions. The impact of the mesh density and near tip (NT) enrichment function are investigate...
متن کاملA Finite Element Method for Crack Growth without Remeshing
An improvement of a new technique for modelling cracks in the nite element framework is presented. A standard displacement-based approximation is enriched near a crack by incorporating both discontinuous elds and the near tip asymptotic elds through a partition of unity method. A methodology that constructs the enriched approximation from the interaction of the crack geometry with the mesh is d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Sciences and Environmental Management
سال: 2018
ISSN: 1119-8362
DOI: 10.4314/jasem.v22i4.10