Cover Picture: Determination of aflatoxin B <sub>1</sub> by biomass derived porous carbon modified electrode with molecularly imprinted polymer (Electroanalysis 5/2023)
نویسندگان
چکیده
The cover image is based on the Short Communication Determination of aflatoxin B1 by biomass derived porous carbon modified electrode with molecularly imprinted polymer Longyi Chen et al., DOI: 10.1002/elan.202200371.
منابع مشابه
In Situ Voltammetric Determination of Promethazine on Carbon Paste Electrode Modified with Nano-sized Molecularly Imprinted Polymer
A precise and simple in-situ voltammetric measurement of promethazine, based on the nano sized molecularly imprinted polymer (nano-MIP) was introduced. The nano-MIP was synthesized utilizing vinyl benzene and Divinylbenzene as the functional monomer and cross-linker respectively, and via the micro-emulsion polymerization method in silicon oil. The MIP particles were then embedded in a carbon pa...
متن کاملVoltammetric Determination of Flunixin on Molecularly Imprinted Polypyrrole Modified Glassy Carbon Electrode
A novel electrochemical sensing approach, based on electropolymerization of a molecularly imprinted polypyrrole (MIPpy) film onto a glassy carbon electrode (GCE) surface, was developed for the detection of flunixin (FXN). The sensing conditions and the performance of the constructed sensor were assessed by cyclic, differential pulse and (DPV) square wave voltammetry (SWV). The sensor exhibited ...
متن کاملFabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin
A modified electrochemical sensor for the determination of amoxicillin (AMX) was reported in this paper. The magnetic molecularly imprinted polymer (MMIP) were suspended in AMX solution and then collected on the surface of a magnetic carbon paste electrode (CPE) via a permanent magnet, situated within the carbon paste electrode and then the voltammetry signals were recorded. It was confirmed th...
متن کاملSYNTHESIS OF MOLECULARLY IMPRINTED POLYMER FOR DETERMINATION OF DILTIAZEM BY EXPERIMENTAL METHOD
Background & Aims: In this study, a magnetic molecular imprinted polymer was used to measure the diltiazem drug. Based on the structure and pharmaceutical agent group, methacrylic acid was selected as a monomer for Diltiazem. Ethylene glycol de-methacrylate and azobisisobutyronitrile were used as cross-linkers and polymerisation initiators, respectively. Also, chloroform was used as a porogenic...
متن کاملPhotoelectrochemical lab-on-paper device based on molecularly imprinted polymer and porous Au-paper electrode.
In this work, microfluidic paper-based analytical device (μ-PAD) was applied in a photoelectrochemical (PEC) method and thus a truly low-cost, simple, portable, and disposable microfluidic PEC origami device (μ-PECOD) was demonstrated. The molecular imprinting technique was introduced into microfluidic paper-based analytical devices (μ-PADs) through electropolymerization of molecular imprinted ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electroanalysis
سال: 2023
ISSN: ['1040-0397', '1521-4109']
DOI: https://doi.org/10.1002/elan.202380501