Coupling of phase field and viscoplasticity for modelling cyclic softening and crack growth under fatigue

نویسندگان

چکیده

A coupled phase field-viscoplasticity approach was developed to model the deformation and crack growth in a nickel-based superalloy under fatigue. The has an advantage predicting cyclic softening behavior of alloy caused by fatigue damage, overcoming major limitation original viscoplasticity model. is also highly effective propagation varied dwell times at peak load, important for By incorporating stress state factor, further utilized investigate 3D cracks Both geometrical feature front overall rate are well captured, confirming predicative capability

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Fatigue crack growth characteristics of Fe and Ni under cyclic loading using a quasi-continuum method

A quasi-continuum (QC) method based on the embedded atom method (EAM) potential was employed to investigate the fatigue crack growth and expansion characteristics of single-crystal Fe and Ni under cyclic loading modes I and II. In particular, the crack growth and expansion characteristics of Fe and Ni under cyclic loading were evaluated in terms of atomic stress fields and force–distance curves...

متن کامل

Strip yield modelling of fatigue crack under variable amplitude loading

The results from ‘strip yield’ approach of the FASTRAN type models of plasticity induced crack closure effects of fatigue cracks subjected to variable amplitude loadings are presented. The strip yield results are compared with authors’ finite element (FE) and experimental results. It has been observed that the strip yield model is seen to be fundamentally limited by choice of α (constraint fact...

متن کامل

Fatigue crack growth in ferroelectrics driven by cyclic electric loading

Fatigue crack growth has been observed recently in ferroelectrics under cyclic electric loading[ Does the crack grow by electric breakdown\ or by the stress _eld near the crack tip< The present paper provides a mechanistic explanation for the electric!_eld!induced fatigue crack growth[ The non!uniform electric _eld near an insulated crack tip might cause domain switching which in turn produces ...

متن کامل

High-Temperature Cyclic Fatigue-Crack Growth in Monolithic Ti3SiC2 Ceramics

identical slip planes) and walls or kink boundaries. Thus, in addition to regular slip, mechanisms for ambient temperature The cyclic fatigue behavior of reactive hot-pressed Ti3SiCz plastic deformation in Ti3SiCz are thought to involve the ceramics are examined at temperatures from ambient to 1200°C readjustment of local stress and strain fields from kink band with the objective of characteriz...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: European Journal of Mechanics A-solids

سال: 2022

ISSN: ['1873-7285', '0997-7538']

DOI: https://doi.org/10.1016/j.euromechsol.2021.104472