Counter-rotating compressor flow mechanism and aerodynamic design
نویسندگان
چکیده
منابع مشابه
Convective and absolute instabilities in counter-rotating spiral Poiseuille flow
We present results of an experimental study on the stability of Taylor–Couette flow in case of counter-rotating cylinders and an imposed axial through flow. We are able to confirm results form recent numerical investigations done by Pinter et al. [24] by measuring the absolute and convective stability boundaries of both propagating Taylor vortices (PTV) and spiral vortices (SPI). Thus our work ...
متن کاملDrag and lift forces on a counter-rotating cylinder in rotating flow
Results are reported of an experimental investigation into the motion of a heavy cylinder free to move inside a water-filled drum rotating around its horizontal axis. The cylinder is observed to either co-rotate or, counter-intuitively, counter-rotate with respect to the rotating drum. The flow was measured with particle image velocimetry, and it was found that the inner cylinder significantly ...
متن کاملNumerical Investigation for the Impact of Single Groove on the Stall Margin Improvement and the Unsteadiness of Tip Leakage Flow in a Counter-Rotating Axial Flow Compressor
A low-speed counter-rotating axial flow compressor (CRAC) with single circumferential grooved casing treatment (CT) was investigated numerically. Both steady and time-accurate numerical calculations were performed to study the effects of the single grooved CTs over the rear rotor on the stability enhancement and the unsteadiness of tip leakage flow (TLF) in the CRAC. Parametric studies indicate...
متن کاملAerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor
This paper describes the introduction of three-dimension (3-D) blade designs into a 5-stage axial compressor with multi-stage computational fluid dynamic (CFD) methods. Prior to a redesign, a validation study is conducted for the overall performance and flow details based on full-scale test data, proving that the multi-stage CFD applied is a relatively reliable tool for the analysis of the foll...
متن کاملDesign and simulation of flow through subsonic axial compressor
Abstract―This paper illustrates the theory behind computational fluid dynamics (CFD) of flow though a gas turbine engine low pressure compressor. The goal of study is to develop a tool to perform shape optimization of low speed airfoils. Mathematical model and computational tool are developed using programming software. Analytical solution is developed to create airfoil geometry. The NACA 4 dig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SCIENTIA SINICA Technologica
سال: 2020
ISSN: 1674-7259
DOI: 10.1360/sst-2020-0088