Cost optimization of Colored Gypsum Composites
نویسندگان
چکیده
منابع مشابه
Gypsum Composites with CDW as Raw Material
Abstract—In this study, the feasibility of incorporating ceramic waste from bricks (perforated brick and double hollow brick) and extruded polystyrene (XPS) waste, is analysed. Results show that it is possible to incorporate up to 25% of ceramic waste and 4% of XPS waste over the weight of gypsum in a gypsum matrix. Furthermore, with the addition of ceramic waste an 8% of surface hardness incre...
متن کاملInvestigations on the Reinforcement of Mechanical Properties of Gypsum Composites Containing E-glass Woven Fabrics
Glass fiber reinforced gypsum composites are new building materials that have been used in covering interior walls. Reinforcement by means of woven fabrics as a three dimensional material is an alternative to the use of short fibers. The application of appropriate fabrics can improve mechanical properties of gypsum composites. The aim of this research article is to investigate the effect of the...
متن کاملOPTIMIZATION OF VERTICAL ALIGNMENT OF HIGHWAYS IN TERMS OF EARTHWORK COST USING COLLIDING BODIES OPTIMIZATION ALGORITHM
One of the most important factors that affects construction costs of highways is the earthwork cost. On the other hand, the earthwork cost strongly depends on the design of vertical alignment or project line. In this study, at first, the problem of vertical alignment optimization was formulated. To this end, station, elevation and vertical curve length in case of each point of vertical intersec...
متن کاملOptimization studies of self-sensing composites
The demand for real-time or in situ structural health monitoring has stimulated efforts to integrate self and environmental sensing capabilities into structural composite materials. Essential to the application of smart composites is the issue of the mechanical coupling of the sensor to the host material. In this study various methods of embedding sensors within the host composite material are ...
متن کاملOptimization of MWCNT – Metal Matrix Composites feedstocks
Micro powder injection moulding-μPIM is a powder injection moulding-PIM variant for microparts/devices. This study is about the optimization and respective production of nanocomposites feedstocks suitable to μPIM process. The optimization of MWCNT content in metal matrix composites-MMC feedstock were performed using torque rheometry until achieve homogeneous feedstocks with suitable flowability...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
سال: 2019
ISSN: 1308-5514
DOI: 10.29137/umagd.406809