Cost-effective wear and oxidation resistant electrodeposited Ni–pumice coating
نویسندگان
چکیده
منابع مشابه
Wear resistant solid lubricant coating made from PTFE and epoxy
A composite coating of polytetrafluoroethylene and epoxy shows 100 · improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is belie...
متن کاملWear behavior of carbon steel electrodeposited by nanocrystalline Ni–W coating
Ni-W coatings, compared to pure nanocrystalline Ni, exhibit higher hardness and wear resistance. In some cases, these coatings are considered as environmental friendly alternatives for hard chromium coating. Till now, most of Ni-W coatings have been produced by direct current electrodeposition from alkaline baths. In this study square pulse current was used for deposition of Ni-W precipitates f...
متن کاملwear behavior of carbon steel electrodeposited by nanocrystalline ni–w coating
ni-w coatings, compared to pure nanocrystalline ni, exhibit higher hardness and wear resistance. in some cases, these coatings are considered as environmental friendly alternatives for hard chromium coating. till now, most of ni-w coatings have been produced by direct current electrodeposition from alkaline baths. in this study square pulse current was used for deposition of ni-w precipitates f...
متن کاملα-Silicene as oxidation-resistant ultra-thin coating material
By performing density functional theory (DFT)-based calculations, the performance of α-silicene as oxidation-resistant coating on Ag(111) surface is investigated. First of all, it is shown that the Ag(111) surface is quite reactive against O atoms and O2 molecules. It is known that when single-layer silicene is formed on the Ag(111) surface, the 3 × 3-reconstructed phase, α-silicene, is the gro...
متن کاملLow-cost Oxidation Resistant C-c Composites
Carbon-carbon (C-C) composites exhibit excellent mechanical, thermal and chemical properties. Their commercial applications are limited by high cost and poor oxidation protection. A low cost process was developed to fabricate C-C composites in one manufacturing step, which leads to substantial cost savings over conventional processing methods. This low cost manufacturing process has been combin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Coatings Technology
سال: 2014
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2014.04.026