Corrosion Sensor for Water-Contaminated Grease
نویسندگان
چکیده
منابع مشابه
Corrosion Sensor for Monitoring the Service Condition of Chloride-Contaminated Cement Mortar
A corrosion sensor for monitoring the corrosion state of cover mortar was developed. The sensor was tested in cement mortar, with and without the addition of chloride to simulate the adverse effects of chloride-contaminated environmental conditions on concrete structures. In brief, a linear polarization resistance method combined with an embeddable reference electrode was utilized to measure th...
متن کاملwater treatment for corrosion control
certain gases, principally oxygen,o , and carbon dioxide, co , dissolved in water accelerate its corrosive properties. the rate of corrosion is approximately in prportion to the quantity of gas dissolved. the removal of gases from water, as practiced in steam station, is effected by mechanical and thermal treatment , by addition of chemicals, or by combinations of these processes, the most wide...
متن کاملSupercritical Water Radiolysis Chemistry Supercritical Water Corrosion
The direct measurement of the chemistry in reactor cores is extremely difficult. The extreme conditions of high temperature, pressure, and radiation fields, are not compatible with normal chemical instrumentation. There are also problems of access to fuel channels in the reactor core. For these reasons, all reaction vendors and many operators have extensively used theoretical calculations and c...
متن کاملLow Cost Efficient Treatment for Contaminated Water
Heavy metals pose a risk of contaminating groundwater and surface water sources due to geogenic activities, industries and agricultural sources. The removal of heavy metals e.g., cadmium, lead, and zinc from drinking, industrial and irrigation water at low concentrations is a recurring challenge, especially in developing countries. Biosorption is a relatively new process that has proved to be v...
متن کاملA Corrosion Sensor for Monitoring the Early-Stage Environmental Corrosion of A36 Carbon Steel
An innovative prototype sensor containing A36 carbon steel as a capacitor was explored to monitor early-stage corrosion. The sensor detected the changes of the surface- rather than the bulk- property and morphology of A36 during corrosion. Thus it was more sensitive than the conventional electrical resistance corrosion sensors. After being soaked in an aerated 0.2 M NaCl solution, the sensor's ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology Transactions
سال: 2020
ISSN: 1040-2004,1547-397X
DOI: 10.1080/10402004.2020.1770389