Corrosion Resistance of RE-(FeCoNi)-B Sintered Magnets.

Corrosion Losses, Mechanisms and Protection Strategies for Sintered Nd-Fe-B Magnets

Impulse Magnetization of Nd-Fe-B Sintered Magnets for Sensors

Magnetization of large Nd-Fe-B sintered permanent magnets is still challenging. This type of permanent magnet is electrically conductive, so impulse magnetization causes a flow of eddy currents which prevent magnetization of the whole volume of the magnet. The paper deals with the impulse magnetization of sintered Nd-Fe-B permanent magnets and shows a method for the determination of suitable pa...

Assessment of corrosion resistance of Nd–Fe–B magnets by silanization for orthodontic applications

Nd–Fe–B permanent magnets are characterised by excellent magnetic properties. However, being extremely vulnerable to the attack of both climate and corrosive environments, their applications are limited. This paper describes how, at different thicknesses of N-propyl-trimetoxy-silane, the coating affects the magnetic force of nickel plated magnets. We also investigate if the corrosion resistance...

The Effect of Heat Treatment on Microstructure and Magnetic Properties of Nd17Fe76.5B5Cu1.5 Type Sintered Magnets

The effects of high temperature homogenization and low temperature annealing treatments on the microstructure and magnetic properties of sintered magnets of an Nd17Fe76.5B5Cu1.5 type alloy have been investigated. The microstructure of the as-cast alloy, consisted of three phases including a Nd2Fe14B1 (2:14:1- type) matrix phase Cu-containing Nd-rich Phase and Free α-iron. The as-sintered magnet...

Coercivity enhancement of Nd-Fe-B sintered magnets by grain boundary modification via reduction-diffusion process

The interface between the Nd2Fe14B particles and the grain boundary surrounding them in Nd-Fe-B sintered magnets was modified by diffusion Dy metal selectively through the grain boundary involving the reduction of Dy2O3 or DyF3 with CaH2 and the coercivity of them was effectively enhanced from 0.98 MA/m to 1.42 MA/m with keeping the high value of remanence. The resultant coercivity was higher t...