Corrosion Resistance of Fe-Cr-Al-Si Alloys with Low Chromium Content
نویسندگان
چکیده
منابع مشابه
Multiple quasicrystal approximants with the same lattice parameters in Al-Cr-Fe-Si alloys
By means of atomic-resolution high-angle annular dark-field scanning transmission electron microscopy, we found three types of giant approximants of decagonal quasicrystal in Al-Cr-Fe-Si alloys, where each type contains several structural variants possessing the same lattice parameters but different crystal structures. The projected structures of these approximants along the pseudo-tenfold dire...
متن کاملThe Effect of Mn-Depleted Surface Layer on the Corrosion Resistance of Shape Memory Fe-Mn-Si-Cr Alloys
In this work, we have examined Fe-Mn-Si-Cr alloys possessing a good shape memory effect due to a high Mn content (28 wt pct). The addition of Cr (5 wt pct) was made in order to give fairly good corrosion resistance to the alloy. But we have verified that even in moderately corrosive environments, the presence of chromium does not bear any passivation. On the other hand, we have found that the a...
متن کاملAtomistic Study of Surfaces and Interfaces of Fe-Cr and Fe-Cr-Al Alloys
Surface and interface properties of Fe-Cr, Fe-Al, and Fe-Cr-Al are studied using Exact Muffin-Tin Orbitals and Monte Carlo methods and with x-ray photoelectron and Auger electron techniques. Surface composition is investigated as a function of oxidation (heating) time. Hard x ray photoelectron spectroscopy (HAXPES) is used to scan non destructively the compositions below the surface. It is foun...
متن کاملPitting Resistance of Pure Fe-17%Cr Alloys: Consequences for Localized Corrosion Modeling
Pitting corrosion was observed on a high purity Fe-17Cr alloy in 0.02M NaCl solution of pH 6.6 at high anodic potential (+ 550 mVISCE). Potentiostatic electrochemical noise measurements were performed, revealing the presence of a characteristic current noise below stable pitting, differing strongly from that observed 011 a series of AISI 430 type 17% Cr stainless steels, with respect to the fre...
متن کاملEffect of Chromium Content on Microstructure and Wear Resistance of Fe-Cr-C Hard facing Layers
Layers of Fe-Cr-C Hard facing material containing various amounts of chromium were deposited on mild steel base metal. Optical Microscope (OM), Scanning Electron Microscope (SCM) and X-ray diffraction (XRD) were used to investigate the effect of chromium content of micro structural characteristics of Fe-Cr-C hard facing layers. The M7C3 carbide refinement mechanism exists on base metal. The exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KnE Materials Science
سال: 2018
ISSN: 2519-1438
DOI: 10.18502/kms.v4i1.2201