Corrosion rates of green novel hybrid conversion coating on aluminium 6061
نویسندگان
چکیده
منابع مشابه
Performance of Tannin/Glycerol-Chromate Hybrid Conversion Coating on Aluminium
A smart hybrid conversion coating has been developed. Modifications of coating solutions with poly-hydroxyl organic materials to reduce the usual mud cracking pattern characteristics of chromate conversion coatings (CCCs) and improve its ability to release inhibitors to corroding sites have been achieved. The smart functionalised chromate conversion coating (SFCCC), developed on aluminium subst...
متن کاملCharacterization Study of Aluminium 6061 Hybrid Composite
Aluminium matrix composites with alumina reinforcements give superior mechanical & physical properties. Their applications in several fields like automobile, aerospace, defense, sports, electronics, bio-medical and other industrial purposes are becoming essential for the last several decades. In the present work, fabrication of hybrid composite was done by Stir casting technique using Al 6061 a...
متن کاملLocalized Corrosion on 2219 Aluminium Alloy Coated with a Titanium Based Conversion Coating
High strength aluminium alloys are widely employed in aerospace applications. However specific environmental conditions may trigger corrosion and therefore these alloys require additional protection. Most current conversion coatings used for this purpose are Cr(VI) based, and thus environmentally undesirable. A possible replacement is a Ti based coating, Nabutan STI/310. The aim of this work is...
متن کاملTrivalent Chromium Conversion Coating for Corrosion Protection of Aluminum Surface
Corrosion is the degradation or deterioration of metal components due to a reaction with the environment. Chromate conversion coating is applied to passivate metallic surface to slow down (and prevent to some extent) corrosion process. Chromate conversion process uses chromium compounds including hexavalent chromium, which is toxic, carcinogenic and hazardous to human health and environment. He...
متن کاملCORROSION BEHAVIOUR OF A 2219 ALUMINIUM ALLOY TREATED WITH A CHROMATE CONVERSION COATING EXPOSED TO A 3.5 % NaCl SOLUTION
This study investigates the formation of a chromate conversion coating at Al-Cu-Fe-Mn intermetallic sites of an Al2219 alloy and the corrosion initiation at these sites in a 3.5 % NaCl solution, using SEM, AES and EDX. Changes in the surface chemistry were monitored after progressive exposures to the solution up to 42 hours. The coating was found to be thinner and more defective on the intermet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Results in Engineering
سال: 2020
ISSN: 2590-1230
DOI: 10.1016/j.rineng.2020.100159