Corrosion Products in Supercharger of Marine Engine by Running Sea Water
نویسندگان
چکیده
منابع مشابه
Corrosion of Concrete in Sea Water (RESEARCH NOTE)
Attack and disintegration of concrete structures under the influence of aggressive fluids, wet gases, etc. are understood as corrosion of concrete. The corrosion of concrete is a chemical, colloidchemical process, yet often a physico-chemical one, while that of reinforced concrete supported oil platforms are subjected to marine environment in the Persian Gulf and therefore corroded. In the pres...
متن کاملCorrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine
In this article, the failure of a heat exchanger during its operation in the marine environment has been analyzed. This heat exchanger was used for cooling the oil in a marine diesel engine. Based on the existing failure history, damages in engine components were observed after 89 hours of engine working due to the leakage of the sea water to the oil. For the objective of the failure analysis, ...
متن کاملCorrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution
Since martensitic precipitation hardened 17-4pH stainless steel has been widely used in corrosive environments, evaluation of its corrosion fatigue behavior is important. In this research, after microstructural studies, mechanical, corrosion, fatigue and corrosion fatigue tests were performed on 17-4pH specimens. Fatigue and corrosion fatigue tests were carried out at the stress ratio of -1 an...
متن کاملBiogenic amines in sea products
Sea food products are being processed through various techniques, i.e. chilling and freezing, heating, irradiating, and curing; regard to the condition of processing, formation of biogenic amines are probable, as raw materials are usually rich in respective precursors. Fermented fish products are among the most vulnerable items to this challenge, these products due to their nutritious value are...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING
سال: 1986
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1974.35.6_348