Corrosion Process of Zn-Co, Zn-Fe and Zn-Ni Alloy Electroplatings
نویسندگان
چکیده
منابع مشابه
Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys
a r t i c l e i n f o Zn–Ni, Zn–Co and Zn–Ni–Co coatings were electrodeposited on mild steel from an acidic chloride bath containing p-aminobenzenesulphonic acid (SA) and gelatin. These additives changed the phase content in the coatings, most likely as a result of their adsorption at the surface of the cathode. The effect of gelatin was more pronounced than that of SA. The Faradaic efficiency ...
متن کاملVoltammetric Determination of Zn(II) in Zn-Fe Alloy Electroplating Baths Using Square-Wave Voltammetry
Desenvolveu-se um método de análise de rotina para a determinação quantitativa de zinco em banhos de galvanoplastia de liga Zn-Fe através da técnica de voltametria de onda quadrada utilizando-se, como eletrodo de trabalho, o eletrodo de gota estática de mercúrio. Amostras reais de banhos de liga foram analisadas sem pré tratamento através do método de adição de padrão. Também foram feitos teste...
متن کاملCorrosion Protection of Steel Using Nonanomalous Ni-Zn-P Coatings
A novel technique for obtaining nonanomalous Ni-Zn-P coatings with high Ni content ~74 wt % as compared to 15-20 wt % in the conventional plating method! has been developed. These coatings show promise as a replacement for Cd in sacrificially protecting steel. Ni-Zn-P coatings were deposited using an electroless method from a solution containing NiSO4 , complexing agent and ammonium chloride. V...
متن کاملDevelopment of Corrosion Resistant Zn-Ni-TiO2 Composite Coatings
The Zn-Ni-TiO2 composite coatings were developed on mild steel by electrodeposition method. The bath constituents (ZnSO4.6H2O, NiSO4.6H2O, TiO2, thiamine hydrochloride) and operating conditions (temperature and pH) were optimized by Hull cell method, for peak performance of the coating against corrosion. The coatings were prepare...
متن کاملDevelopment of a New Electrodeposition Process for Plating of Zn-Ni-X (X5Cd, P) Alloys I. Corrosion Characteristics of Zn-Ni-Cd Ternary Alloys
A new Zn-Ni-Cd plating process was developed which offers a unique way of controlling and optimizing the Ni and Cd contents in the final deposit. Zinc-nickel-cadmium alloy was deposited from a 0.5 M NiSO4 1 0.2 M ZnSO4 bath in the presence of 0.015 M CdSO4 and 1 g/L nonyl phenyl polyethylene oxide. Using this process a Zn-Ni-Cd ternary alloy, with a higher nickel content as compared to that obt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1987
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.73.14_1730