Corrosion of Tin Plate Surface and Dislocation Distribution
نویسندگان
چکیده
منابع مشابه
Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics
The surface characteristics of the contact zone of tin-plated copper alloy contacts subjected to fretting motion for 8000, 16,800 and 48,000 cycles under unlubricated conditions are presented. The nature of the contact zone, at the verge of wearing out of the tin coating as well as upon the coating is completely worn out, is assessed using scanning electron microscopy (SEM), energy-dispersive X...
متن کاملFretting corrosion of tin-plated contacts
The susceptibility of tin-plated contacts to fretting corrosion is a major limitation for its use in electrical connectors. The present paper evaluates the influence of a variety of factors, such as, fretting amplitude (track length), frequency, temperature, humidity, normal load and current load on the fretting corrosion behaviour of tin-plated contacts. This paper also addresses the developme...
متن کاملInvestigation of the electrical properties and corrosion resistance of TiN coating deposited by reactive sputtering on the titanium bipolar plate, used in polymeric fuel cell
The effect of titanium nitride film on the properties of titanium bipolar plates used in polymeric fuel cell was investigated in this research. TiN coatings was deposited on the Ti-grade 1 substrate by using DC-sputtering method. Pure titanium was used as target and coating deposition was done in argon and nitrogen atmosphere. Different TiN thickness was developed by changing sputtering time. T...
متن کاملNanocap-shaped tin phthalocyanines: synthesis, characterization, and corrosion inhibition activity.
Thermal and microwave reactions between [PcSn(IV)Cl2] (1) and the potassium salts of eight fatty acids (2 a-h) led to cis-[(RCO2)2Sn(IV)Pc] compounds (3 a-h) in yields ranging from 54 to 90 %. Compounds 3 a-h were fully characterized by elemental analysis, spectroscopy (IR, UV/Vis, multinuclear NMR), and seven X-ray diffraction structures, whereby two different allotropes were observed in two c...
متن کاملEffect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings
Titanium nitride thin films were grown on 304 stainless steel substrates at various nitrogen/argon flow ratios by ion beam sputtering (IBS) technique. The current research is a follow up study on the influence of gas ratio on structural and corrosion properties in the TiN coated 304 stainless steel. Film structural identification of phases was performed using X-ray diffractometry (XRD). Sca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING DIGEST
سال: 1964
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1954.13.12_532