Corrosion Morphology and Mechanical Behavior of Corroded Prestressing Strands
نویسندگان
چکیده
منابع مشابه
Acoustic Emission use for prestressing strands corrosion assessment
Acoustic emission (AE) is studied to monitor stress corrosion cracking (SCC) of prestressing strands. This nondestructive method seems particularly recommended because it has the capacity to realize a real time and a remote detection of active defects. In this study corrosion mechanisms are generated in an accelerated way. A particular attention has been made on hydrogen embrittlement process b...
متن کاملCorrosion Performance of Prestressing Strands in Contact with Dissimilar Grouts
To improve the corrosion protection provided to prestressing strands, anti-bleed grouts are used to fill voids in post-tensioning ducts that result from bleeding and shrinkage of older portland cement grouts. Environmental differences caused by exposing the strands to dissimilar grouts, however, have the potential to cause rapid corrosion. Portland cement grout, gypsum grout, and four commercia...
متن کاملAn Investigation of Degradation of Mechanical Behaviour of Prestressing Strands Subjected to Chloride Attacking
Corrosion of reinforcing and prestressing steel due to chloride contamination is one of the primary causes of deterioration of concrete structures. A review of published literatures shows that the research on the deterioration of mechanical properties of reinforcing steel is more than that on prestressing strands, even though the corrosion of prestressing strands may trigger structural collapse...
متن کاملPull-Out Strength and Bond Behavior of Prestressing Strands in Prestressed Self-Consolidating Concrete
With the extensive use of self-consolidating concrete (SCC) worldwide, it is important to ensure that such concrete can secure uniform in-situ mechanical properties that are similar to those obtained with properly consolidated concrete of conventional fluidity. Ensuring proper stability of SCC is essential to enhance the uniformity of in-situ mechanical properties, including bond to embedded re...
متن کاملMechanical Properties and Corrosion Behavior of a Beta Titanium Alloy
Recently, people devote to the development of beta titanium alloys which have better biocompatibility because of the addition of Mo, Nb, Ta, Zr, Sn, et al. In this paper, the effects of heat treatment and cold roll deformation on the mechanical properties of the Ti-11.3Mo-6.6Zr-4.3Sn alloy (TMZS) are investigated by tensile test. The results show that the excellent combination of strength and d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Concrete Technology
سال: 2020
ISSN: 1346-8014,1347-3913
DOI: 10.3151/jact.18.545