Corrosion in Br2-O2-Ar atmosphere of Ni-20Cr-1Si alloys coated by reactive element oxides
نویسندگان
چکیده
منابع مشابه
Corrosion Performance of Ni-Based Alloys in Sodium Metavanadate
1 Universidad Autonoma del Estado de Morelos, CIICAp, Avenida Universidad 1001, 62209 Cuernavaca, MOR, Mexico 2 Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico, Avenida Universidad s/n, 62210 Cuernavaca, MOR, Mexico 3 Facultad de Quımica, Universidad Nacional Autonoma de Mexico, 04510 Mexico, DF, Mexico 4 Corrosion y Proteccion, Buffon 46, 11590 Mexico, D.F., Mexico * E-m...
متن کاملIndustrial Cu-Ni alloys for HTS coated conductor tape
Copper rich Cu-Ni alloys have been textured with the RABiTS method in order to get non-magnetic and cost efficient substrates for coated conductor wires. The study is focused on two industrial compositions: Cu55Ni45 (Constantan) and Cu70Ni30. Studies on surface roughness have been done. The effects of annealing conditions (temperature and atmosphere) on the grain boundaries deepness were analyz...
متن کاملFretting Corrosion Behavior of Experimental Ti-20Cr Compared to Titanium
Experimental cast titanium alloys containing 20 mass% chromium (Ti-20Cr) show preferable mechanical properties and a good corrosion resistance. This study evaluated the fretting corrosion behavior of Ti-20Cr. Ti-20Cr (n = 4) and commercially pure titanium (CP-Ti, n = 6) disk specimens were used. The fretting corrosion test was performed by electrochemical corrosion at 0.3 V in 0.9% saline solut...
متن کاملThe corrosion behavior and hemocompatibility of TiNi alloys coated with DLC by plasma based ion implantation
Diamond-like carbon (DLC) films have been successfully deposited on Ti–50.8 at.% Ni alloys using plasma based ion implantation (PBII) technique. The influence of the pulsed negative bias voltage applied to the substrate from 12 eV to 40 eV on the surface characteristics and corrosion resistant property as well as hemocompatibility has been investigated. The results show that the RMS values firs...
متن کاملStable Solar-Driven Water Oxidation to O2(g) by Ni-Oxide-Coated Silicon Photoanodes.
Semiconductors with small band gaps (<2 eV) must be stabilized against corrosion or passivation in aqueous electrolytes before such materials can be used as photoelectrodes to directly produce fuels from sunlight. In addition, incorporation of electrocatalysts on the surface of photoelectrodes is required for efficient oxidation of H2O to O2(g) and reduction of H2O or H2O and CO2 to fuels. We r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Science
سال: 1996
ISSN: 1881-3917,0915-5651
DOI: 10.2978/jsas.8.110