Corrosion-fatigue and prior corrosion-fatigue strengths of aluminum alloys
نویسندگان
چکیده
منابع مشابه
Corrosion fatigue of biomedical metallic alloys: mechanisms and mitigation.
Cyclic stresses are often related to the premature mechanical failure of metallic biomaterials. The complex interaction between fatigue and corrosion in the physiological environment has been subject of many investigations. In this context, microstructure, heat treatments, plastic deformation, surface finishing and coatings have decisive influence on the mechanisms of fatigue crack nucleation a...
متن کاملFracture Mechanics and Corrosion Fatigue
The development and current state-of-the-art in fracture mechanics in relation to studies of environment-enhanced fatigue-crack growth (corrosion fatigue) and fatigue-crack growth per se are reviewed. Patterns of response of materials to different loading and environmental conditions are considered in terms of the probable mechanisms for environmental embrittlement. The usefulness of the fractu...
متن کاملFatigue and Corrosion Fatigue Behavior of Nickel Alloys in Saline Solutions
Nickel based alloys have been developed as materials offering superior corrosion fatigue. The fatigue performance of IN600, IN601 and C22 was examined in increasing saline solution severity of 3.5% sodium chloride at pH = 6.8. Results of fatigue and corrosion fatigue tests indicate that the fatigue lives of IN600, IN601 and C22 tested in 3.5 % sodium chloride solution (NaCl) are essentially the...
متن کاملStress Corrosion and Static Fatigue of Glass
to be published in Zeitschrift fuer Anorganische und Allgemeine Chemie. (b) Vladimir Balek, “Rare-Gas Diffusion, Reactivity and Electrical Conductivity of Solid ZnO”; to be published in Physica Status Solidi. l2 J. Beretka and M. J. Ridge, “Formation of Zinc Ferrite at Low Temperatures,” Nature (London), 216 [5114] 473-74 (1967). l3 Vladimir Balek. “Emanation Method for Estimating Reactivity of...
متن کاملFatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
Nowadays modification of metallic biomaterials which are used as implants for bone and hard tissues replacement is considered as an important subject. In the current study, corrosion fatigue properties of Ti-6Al-4V alloy investigated via Rotating-Bending standard test method and then, the results compared with the fatigue properties of the specimens tested in the same conditions. Scanning elect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1968
ISSN: 0451-5994
DOI: 10.2464/jilm.18.257