CORROSION BEHAVIOUR OF Ni PTFE and Ni Al2O3 COATING
نویسندگان
چکیده
منابع مشابه
Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings
A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical paramete...
متن کاملCorrosion Behaviour of High-Mn TWIP Steels with Electroless Ni-P Coating
An attempt has been taken to improve the corrosion resistance of twinning-induced plasticity (TWIP) steels (Fe-25Mn and Fe-25Mn-3Al) by electroless Ni-P coating. Corrosion resistance in 3.5% NaCl and 0.1M H2SO4 solutions was characterized by the potentiodynamic polarization curves and Tafel method calculations. It was found that Ni-P coating improved the corrosion resistance by the factor of 4 ...
متن کاملThe Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating
In the present study, Ni-P-CNT composite coating was successfully fabricated via electroless plating. Scanning electron microscopy (SEM) was used to characterize the coatings. The effect of CNTs concentration in the bath on its content in the composite coatings was studied. Furthermore, the corrosion behaviour of the coatings with different contents of CNTs was evaluated using Tafel polarizatio...
متن کاملCorrosion Resistance Enhancement of AZ91 Magnesium Alloy Using Ni-P Interlayer and Electrophoretic Deposited 3YSZ Coating
The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...
متن کاملFabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties
In this study, functionally graded Ni-Al2O3 composite coating (FGN-A) has been produced from nickel Watt’s bath containing different concentrations of Al2O3 particles. For this, different composite coatings were electroplated in the same bath with different particles concentration to find the optimum concentration of particles in which the maximum content with uniform distribution of Al2O3 part...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal on Design and Manufacturing Technologies
سال: 2007
ISSN: 0973-9106
DOI: 10.18000/ijodam.70015