Corrosion Behavior of Stainless Steels in Sulfuric Acid containing Fe<sup>3+</sup> and Cl<sup>-</sup>
نویسندگان
چکیده
منابع مشابه
Effect of Secondary Phase Precipitation on the Corrosion Behavior of Duplex Stainless Steels
Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly used for many industrial applications due to their good mechanical properties and corrosion resistance in acidic, caustic and marine environments. However, DSSs are susceptible to intergranular, pitting and stress corrosion in corrosive environments due to the formation of secondary phases. Such phases are...
متن کاملInteraction between Lubricants Containing Phosphate Ester Additives and Stainless Steels
One way to improve fuel efficiency in today’s jet aircraft engines is to create an environment for higher operating temperatures and speeds. New and improved lubricants and bearing materials must be developed to remain stable in these elevated operating temperatures. Three lubricants, with varying amounts of tricresyl phosphate added as an anti-wear/extreme pressure additive were tested on two ...
متن کاملCorrosion Behavior of Stainless Steel Clad Rebar
Stainless steel clad rebar (SCR) was investigated because it may become a cost-effective means of controlling corrosion in concrete under very aggressive environments. Sound SCR (316L cladding) resisted corrosion in saturated Ca(OH)2 solution (SCS) with up to 5 wt% chloride. Cladding breaks on SCR induced significant corrosion of exposed underlying CS in SCS with only 1 wt% chloride. A computer...
متن کاملStrong inorganic acid mists containing sulfuric acid.
Occupational exposure to strong inorganic acid mists containing sulfuric acid is specifically associated with laryngeal and lung cancer. Studies of one U.S. cohort of male workers in pickling operations in the steel industry found excesses of laryngeal cancer (approximately twofold) after adjustment for smoking and other potentially confounding variables (Steenland et al. 1988). A ten-year foll...
متن کاملStudy of the Corrosion Resistance of Type 304L and 316 Austenitic Stainless Steels in Acid Chloride Solution
The corrosion resistance of type 304L and 316 austenitic stainless steels in 2M H2SO4 at 0-1.5%NaCl concentrations was studied through potentiodynamic polarization technique and optical microscopy analysis. The corrosion rate, pitting potential, passivation potential and surface morphology of both steel where significantly altered by the Clion concentration, alloy composition and metallurgical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING
سال: 1976
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1974.25.11_665