Corrosion Assessment for Boron Steel Weldments Prepared by Overlap Welding and Successive Hot Press Forming Processes
نویسندگان
چکیده
منابع مشابه
Boron-containing Tool Coatings for Hot Forming
Analytical investigations of the test tools reveal in the most heavily stressed parts of the bolt signifi cantly different wear patterns for the tested variants also in microsections (Fig. 2). Data for a wear analysis evaluation regarding adhesion (positive values) and abrasion (negative values) have been obtained by using a 3-D coordinate measuring machine to compare the contour after stress t...
متن کاملDual–Phase Hot–Press Forming Alloy
Hot–press forming steels are formed in a fully austenitic state followed by die– quenching in order to generate martensite and achieve a strong steel. The ductility however, tends to be limited. We explore in this work a novel steel design in which the forming operation is in the two–phase austenite and ferrite field, so that the quenching results in a dual–phase ferrite and martensite microstr...
متن کاملOccupational exposure to welding gases during three welding processes and risk assessment by SQRCA method
Background: Hazardous chemical agents in the welding operation are a mixture of metal fumes and toxic gases, the inhalation of which causes adverse health effects among welders. The emission of gases in the workplace is a logical cause for concern regarding the potential development of respiratory disease. The aim of the present study was to determine the concentration values of gases discharge...
متن کاملHot Forming of Aisi A2 Tool Steel
In order to optimize the hot forming process of tool steels, further improvement of flow stress prediction and additional knowledge on hot deformability, especially at lower and upper limits of the hot working range, are required. The hot working ranges for these steels are very narrow as a consequence of the role of alloying elements, which form carbides. Carbides improve tool steel’s hardenab...
متن کاملEvaluation of Ductile Damage Criteria in Hot Forming Processes
The process of ductile fracture which occurs due to the accumulation, growth and combination of defects or cracks of material is called ductile damage. Failure in materials can be predicted, using damage mechanics and damage criteria. On the other hand, most of the materials depended to the manufacturing process, are formed in warm or hot conditions so that; the temperature also affects on the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Welding and Joining
سال: 2017
ISSN: 2466-2232
DOI: 10.5781/jwj.2017.35.5.1