Corrosion and wear behaviour of highly porous Ti-TiB-TiNxin situ composites in simulated physiological solution
نویسندگان
چکیده
منابع مشابه
The Corrosion Behavior of Ti-Based Metallic Glass Matrix Composites in the H2SO4 Solution
In-situ metallic glass matrix composites (MGMCs) are a new kind of promising structural engineering material. In this study, a comprehensive study about the corrosion behavior of in-situ Ti46Zr20V12Cu5Be17 MGMCs versus their size was conducted. It is interesting to find that the large sample exhibits a more excellent corrosion resistance than the small sample in the 10% H2SO4 solution both in c...
متن کاملSpecial modes of corrosion under physiological and simulated physiological conditions.
The aim of this article is to review those aspects of corrosion behaviour that are most relevant to the clinical application of implant alloys. The special modes of corrosion encountered by implant alloys are presented. The resistance of the different materials against the most typical corrosion modes (pitting corrosion, crevice corrosion and fretting corrosion) is compared, together with obser...
متن کاملMicrostructure and property of TiB-reinforced Ti alloy composites by laser metal deposition
TiB-reinforced Ti alloy composites have been laser deposited with pre-alloyed Ti-6Al4V-1B powder. The microstructure of the as-deposited and heat treated composites have been characterized in detail using scanning electron microscope (SEM). A homogeneous dispersion of needle-like TiB precipitates is formed in the Ti-6Al-4V α/β matrix. TiB precipitates promote formation of small near equaxed α/β...
متن کاملWhisker alignment of Ti±6Al±4V/TiB composites during deformation by transformation superplasticity
We examine the eect of 10 vol.% TiB whisker reinforcement on transformation superplasticity of Ti±6Al±4V, induced by thermal cycling about the a/b phase transformation range of the matrix under a uniaxial tensile stress. During superplastic deformation, the whiskers gradually align along the external loading axis, as measured by electron back-scattering diffraction of deformed specimens. The c...
متن کاملCorrosion mechanism of Ti-Cr alloys in solution containing fluoride.
OBJECTIVE The objective of this study was to clarify the influence of chromium content on surface reaction of Ti-Cr alloys in an acidic fluoride-containing saline solution. METHODS Four Ti-Cr alloys containing 5, 10, 15 or 20 mass% chromium were characterized in terms of dissolution of metals in an acidic fluoride-containing saline solution and surface structure by X-ray photoelectron spectro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TURKISH JOURNAL OF CHEMISTRY
سال: 2020
ISSN: 1303-6130
DOI: 10.3906/kim-2001-40