Corrosion and Wear Behaviour of Boronized high Carbon and Chromium Cast Steel
نویسندگان
چکیده
منابع مشابه
Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel
The aim of the present study was to investigate the effect of quenching and tempering temperatures on the microstructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistant steel. In addition, the dominant wear mechanisms were studied. For this purpose, austenitizing and tempering temperatures were selected in the ranges of 900- 1000 °C and 300- 500...
متن کاملTribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملINVESTIGATION OF THE MECHANICAL, CORROSION PROPERTIES AND WEAR BEHAVIOUR OF ELECTROLESS Ni-P PLATED MILD STEEL
In the present study the mild steel (MS) specimens were coated with Nickel-Phosphorus (Ni-P) using acrylic bath. Heat treatment was carried out on specimens under different temperatures and time periods in an inert atmosphere. The various mechanical and tribological tests were performed on specimens. Using weight loss method, the corrosion nature of the samples under different environments was ...
متن کاملinvestigation of wear mechanism in quenched and tempered medium carbon-high chromium martensitic steel using dry sand/rubber wheel
the aim of the present study was to investigate the effect of quenching and tempering temperatures on themicrostructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistantsteel. in addition, the dominant wear mechanisms were studied. for this purpose, austenitizing and temperingtemperatures were selected in the ranges of 900- 1000 °c and 300- 500 °c...
متن کاملCasting Process Design and Wear Properties of a High Chromium Cast Iron Hammer
Article history: Received: 13.04.2015. Received in revised form: 13.07.2015. Accepted: 15.07.2015. In this article, both chemical composition and structure of a high chromium iron hammer head were designed and analyzed respectively. Also, the casting process was investigated and optimized through numerical simulation using commercial software View Cast. On the basis of numerical simulation and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2013
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.53.887