Corrosion and Hardness Behaviour of Al/GO Nanocomposites Processed by the Ultrasonic Gravitational Stir Casting Method
نویسندگان
چکیده
The objective of this work is to evaluate the corrosion behaviour nanographene oxide reinforced aluminium (Al/GO) metal matrix composites with different immersion time periods using technique. Al/GO were fabricated by ultrasonic gravitational stir casting process. corrosions evaluated a scanning electron microscope. experimental results revealed that rate decreased and weight losses increased increasing periods. nonimmersed exhibited higher microhardness values compared immersed composites.
منابع مشابه
Tribological behaviour of AA 5083/Micron and Nano SiC composites fabricated by ultrasonic assisted stir casting process
Metal Matrix composites (MMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence and other industries. MMCs are projected to significantly reduce the overall weight of the vehicle and aircraft while maintaining satisfactory structural strength. Micron and Nano-sized ceramic particle reinforced aluminum matrix composites fabricat...
متن کاملTheoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process
In this study, thermoplastic polyolefin elastomeric (TPO) nanocomposites were fabricated by friction stir processing. The effect of different pin geometries on clay dispersion and mechanical properties of the TPO nanocomposite reinforced with 3% wt nanoclay has been first investigated. The optimum pin geometry namely threaded cylindrical pin was then used to fabricate the nanocomposites contain...
متن کاملSimulation of the Stir Casting Process
Non homogeneous particle distribution is one of the greatest problems in casting Metal Matrix Composites (MMC's). To optimize some of the parameters for uniform particle distribution for batch compocasting the present simulation studies were conducted. The simulation involves visualisation experiments. In the visualisation experiments liquid and semi solid aluminium are replaced by other fluids...
متن کاملtheoretical models for prediction of mechanical behaviour of the pp/epdm nanocomposites fabricated by friction stir process
in this study, thermoplastic polyolefin elastomeric (tpo) nanocomposites were fabricated by friction stir processing. the effect of different pin geometries on clay dispersion and mechanical properties of the tpo nanocomposite reinforced with 3% wt nanoclay has been first investigated. the optimum pin geometry namely threaded cylindrical pin was then used to fabricate the nanocomposites contain...
متن کاملStructure and ultrastructure of microvessels in the kidney seen by the corrosion casting method.
Scanning electron microscopic observation of corrosion casts is the finest technique to describe spatial patterns of microvessels in many organs, giving a readily interpreted representation of their vascular architecture without interference from surrounding tissues. We focused on the renal cortex of guinea pigs to make an in-depth morphological analysis of structural and ultrastructural detail...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Corrosion
سال: 2021
ISSN: ['1687-9325', '1687-9333']
DOI: https://doi.org/10.1155/2021/6658186