Correlation between inhomogeneity in polyacrylonitrile spinning dopes and carbon fiber tensile strength

Correlation Between 90o Tensile and 90o Flexural Properties for Thermoplastic Based Carbon-Fiber Composites

Correlation between the Weld Residual Stresses and its Tensile and Impact Strength

In this study, the tensile strength, impact strength, and the hardness of the weld are determined. A criterion is proposed for describing the effect of residual stress on the weld mechanical properties. Dimensionless parameters such as Rya (the average of residual stress over the material yield strength), Rym (the maximum residual stress over the material yield strength), ...

Drawing dependent structures, mechanical properties and cyclization behaviors of polyacrylonitrile and polyacrylonitrile/carbon nanotube composite fibers prepared by plasticized spinning.

Drawing to change the structural properties and cyclization behaviors of the polyacrylonitrile (PAN) chains in crystalline and amorphous regions is carried out on PAN and PAN/carbon nanotube (CNT) composite fibers. Various characterization methods including Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and thermal gravimetric analysis are used to ...

Effect on Tensile Strength of Wood-based Carbon Fiber Impregnated by Boron

Wood-based carbon fiber derived from liquefied wood has the disadvantages of low mechanical strength and unstable performance. To improve its mechanical properties, wood-based carbon fiber precursors were impregnated with 5 wt.% and 8 wt.% boric acid solutions for 1 h and then carbonized at 900 °C for 1 h. The effect of boron content on fiber tensile strength and microstructure was investigated...

Correlation between flexural and indirect tensile strength of resin composite cements

BACKGROUND To evaluate a potential correlation between flexural strength and indirect tensile strength in assessing the mechanical strength of resin composite cements. METHODS Flexural strength (n = 5) and indirect tensile strength (n = 5) of 7 resin composite cements (RelyX Unicem 2 Automix [RXU], Panavia SA [PSA], Clearfil SA [CSA], Panavia F2.0 [PF2], Multilink Implant [MLI], DuoCem [DCM],...