Correlation Between Cutting Signal Characteristics and Microburr Formation in Micromilling of Al6061-T6 Alloy
نویسندگان
چکیده
منابع مشابه
Stress Analysis of Switchover Module with Al6061-T6 and Al7075-T6 for Hybrid Locomotion Mobile Robot
This study presents the design and stress analysis of mobile robot switchover module (track tensioner), which helps the robot to work in hybrid locomotion mechanism. The track tensioner is a loading and unloading module that helps the locomotion system transformability while robot moves either on wheel or track mechanism. The selection of suitable material for its design, the model is therefore...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
effect of bataine and sulphate supplement on wool and milk characteristics and lambs performance in naine ewes
تعداد 20 رأس میش نژاد نائینی 6+-24 ماهه، با میانگین وزن 2/3-+40 کیلوگرم، همراه با 20 رأس بره های آنها در قالب طرح کاملا تصادفی اثر بتائین و مکمل سولفات بر خصوصیات شیر و پشم و عملکرد بره ها بررسی شد. میش ها بطور تصادفی در چهار تیمار قرار گرفتند. تیمارها عبارت بودند از: 1-گروه شاهد 2-بتائین (05/0 درصد ماده خشک) 3-سولفات (24/0 سولفور درصد ماده خشک 4-بتائین هرماه با سولفات. جیره غذائی طبق nrc با مح...
15 صفحه اولInfluence of Material Microstructures in Micromilling of Ti6Al4V Alloy
In the most recent decades the introduction of unconventional machining processes allowed the development of micromachining techniques. In this work, the influence of material microstructures on the micromilling process was investigated. Ti6Al4V alloy was selected as workpiece material since it is a very common material for micro applications and because its duplex microstructure can be easily ...
متن کاملInfluence of the Estimation of Cutting Force Coefficients in Micromilling
This paper presents a new model for the estimation of cutting forces in micromilling based on specific cutting pressure. The proposed model includes three parameters which allow to control the entry of the cutter in the workpiece and which consider also the errors in the radial position of the cutting edges of the tool. The presented model is orientated to adaptive control in the micromilling p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Korean Society of Manufacturing Technology Engineers
سال: 2016
ISSN: 2508-5093
DOI: 10.7735/ksmte.2016.25.6.401