Correlation between crack propagation rate and cure process of epoxy resins

Fatigue crack propagation in microcapsule - toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...

Thermal Rheological Analysis of Cure Process of Epoxy Prepreg

The cure process of epoxy prepreg used as composite pipe joints was studied by means of differential scanning calorimetry (DSC), Bohlin Rheometer and other techniques. Isothermal DSC measurements were conducted between 110 and 220 C, at 10 C intervals. The results show that the complete cure reaction could be achieved at 220 C. The isothermal cure process was simulated with the four-parameter a...

Epoxy Resins in Electron Microscopy

A method of embedding biological specimens in araldite 502 (Ciba) has been developed for materials available in the United States. Araldite-embedded tissues are suitable for electron microscopy, but the cutting qualities of the resin necessitates more than routine attention during microtomy. The rather high viscosity of araldite 502 also seems to be an unnecessary handicap. The less viscous epo...

Toxicity studies of cured epoxy resins.

Applications of FTIR on Epoxy Resins – Identification, Monitoring the Curing Process, Phase Separation and Water Uptake