Correction to: Thermal interaction in two‑layered solid fuel system

stability and attraction domains of traffic equilibria in day-to-day dynamical system formulation

در این پژوهش مسئله واگذاری ترافیک را از دید سیستم های دینامیکی فرمول بندی می کنیم.فرض کرده ایم که همه فاکتورهای وابسته در طول زمان ثابت باشند و تعادل کاربر را از طریق فرایند منظم روزبه روز پیگیری کنیم.دینامیک ترافیک توسط یک نگاشت بازگشتی نشان داده می شود که تکامل سیستم در طول زمان را نشان می دهد.پایداری تعادل و دامنه جذب را توسط مطالعه ویژگی های توپولوژیکی تکامل سیستم تجزیه و تحلیل می کنیم.پاید...

3D Investigation of Tubular PEM Fuel Cell Performance Assuming Fluid- Solid- Heat Interaction

According to the declining trend of fossil fuel resources and the need to use renewable energies, appropriate research should be conducted for technical and functional studies in this regard. Therefore, in this research, a tubular PEM fuel  cell as a suitable energy source with three-dimensional geometry has been numerically simulated and investigated. For a comprehensive study, the equations o...

A New Sensitivity Study of Thermal Stress Distribution for a Planar Solid Oxide Fuel Cell

Converting chemical energy into electricity is done by an electro-chemical device known as a fuel cell. Thermal stress is caused at high operating temperature between 700 oC to 1000 oC of SOFC. Thermal stress causes gas escape, structure variability, crack initiation, crack propagation, and cease operation of the SOFC before its lifetime. The aim of this study is to presen...

Thermal -Hidraolyc Study of Trr Core in Fuel Conversion Frome Highly Enriched Uranium to Low Enriched Uranium Fuel (RESEARCH NOTES)

Hydrothermal Treatment of Municipal Solid Waste to Produce Solid Fuel

This paper describes the application of innovative hydrothermal technology on local municipal solid waste (MSW) to produce low chlorine content solid co-firing fuel with coal. Raw MSW was treated at temperatures ranging from 210 to 235°C with 30 to 90 minutes holding period. The process yielded slump products which were then naturally dried to 5% moisture content, resulted in dry products with ...