Correction to: Measurement of Tungsten Carbide Tool Wear by Tribological Investigations
نویسندگان
چکیده
منابع مشابه
Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملCryogenic treatment of tungsten carbide reduces tool wear when machining medium density fiberboard
igh-temperature corrosion/oxidation has been shown to be a major contributor to the wear of tungsten carbide when machining medium density fiberboard (MDF) (Stewart 1992). Consequently, a change in the properties of the tool material to resist wear from the adverse wood machining environment needs to be investigated. A deep cryogenic treatment shows promise as a tool material treatment for incr...
متن کاملWear and tool life of tungsten carbide, PCBN and PCD cutting tools
The wear mechanisms of cutting tools made of tungsten-carbide (WC), PCBN and PCD were investigated using the tool life and temperature results available in the literature. For tool/work combinations WC/steel and PCBN/hardened-steel, under practical conditions, tool wear was found to be greatly influenced by the temperature. It was concluded that the most likely dominant tool wear mechanism for ...
متن کاملSEM and AFM Investigations of Surface Defects and Tool Wear of Multilayers Coated Carbide Inserts
Coated tool inserts can be considered as the backbone of machining processes due to their wear and heat resistance. However, defects of coating can degrade the integrity of these inserts and the number of these defects should be minimized or eliminated if possible. Recently, the advancement of coating processes and analytical tools open a new era for optimizing the coating tools. First, an over...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Bio- and Tribo-Corrosion
سال: 2020
ISSN: 2198-4220,2198-4239
DOI: 10.1007/s40735-020-00367-6