Correction: Inorganic-modified semiconductor TiO2 nanotube arrays for photocatalysis
نویسندگان
چکیده
منابع مشابه
Carbon-modified TiO2 for photocatalysis
Here we present a method to produce TiO2 nanocrystals coated by thin layer of graphitic carbon. The coating process was prepared via chemical vapor deposition (CVD) with acetylene used as a carbon feedstock with TiO2 used as a substrate. Different temperatures (400°C and 500°C) and times (10, 20, and 60 s) of reaction were explored. The prepared nanocomposites were investigated by means of tran...
متن کاملPhotocurrent response and semiconductor characteristics of Ce-Ce2O3-CeO2-modified TiO2 nanotube arrays
We reported Ce and its oxide-modified TiO2 nanotube arrays (TNTs) and their semiconductor properties. The TNTs were prepared by anodic oxidation on pure Ti and investigated by electrochemical photocurrent response analysis. Then, the TNT electrodes were deposited of Ce by cathodic reduction of Ce(NO3)3 6H2O. After deposition, the TNT electrodes were fabricated by anodic oxidation at E = 1.0 V(S...
متن کاملFast-rate formation of TiO2 nanotube arrays in an organic bath and their applications in photocatalysis.
In this work, 18.5 microm titanium oxide (TiO(2)) nanotube arrays were formed by the anodization of titanium (Ti) foil in ethylene glycol containing 1 wt% water and 5 wt% fluoride for 60 min at 60 V. The fast growth rate of the nanotube arrays at 308 nm min(-1) was achieved due to the excess fluoride content and the limited amount of water in ethylene glycol used for anodization. Limited water ...
متن کاملSuper-long aligned TiO2/carbon nanotube arrays.
5 mm long aligned titanium oxide/carbon nanotube (TiO(2)/CNT) coaxial nanowire arrays have been prepared by electrochemically coating the constituent CNTs with a uniform layer of highly crystalline anatase TiO(2) nanoparticles. While the presence of the TiO(2) coating was confirmed by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and x-ray diffraction, the r...
متن کاملIdeally Hexagonally Ordered TiO2 Nanotube Arrays
Ideally hexagonally ordered TiO2 nanotube layers were produced through the optimized anodization of Ti substrates. The Ti substrates were firstly covered with a TiN protecting layer prepared through atomic layer deposition (ALD). Pre-texturing of the TiN-protected Ti substrate on an area of 20×20 μm2 was carried out by focused ion beam (FIB) milling, yielding uniform nanoholes with a hexagonal ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy & Environmental Science
سال: 2017
ISSN: 1754-5692,1754-5706
DOI: 10.1039/c7ee90043k