Correction: Fabrication and characterization of Al2O3-TiB2 nanocomposite powder by mechanochemical processing

نویسندگان

چکیده

A Correction this paper has been published: https://doi.org/10.1007/s41779-021-00581-6

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing

In the present study, Al5083- Al2O3 nanocomposite was successfully prepared by friction stir processing (FSP) with rotational speed of 710 rpm and travel speed of 14 mm/min. In order to improve distribution of Al2O3 particles, a net of holes were designed on the surface of Al5083 sheet. The samples were characterized by optical and scanning electron microscopy (SEM), microhardness, tensile and ...

متن کامل

Mechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder

Boron carbide is one of the hardest materials. The combustion method was used to synthesize B4C-TiB2 nanocomposite powder in a B2O3-Mg-TiO2-C system. An experimental study of the formation of B4C–TiB2 nanoparticles was conducted in the thermal explosion mode. A mixture of B2O3:TiO2:Mg:C at a molecular ratio of 3:1:12:1 was chosen to obtain the B4C–TiB2. This powder mixture was milled for differ...

متن کامل

Kinetics of Fe2O3-Al reaction prior to mechanochemical synthesis of Fe3Al-Al2O3 nanocomposite powder using thermal analysis

The effect of ball milling on kinetics of the thermite reaction of 3Fe2O3 + 8Al powder mixture to synthesizeFe3Al-Al2O3 nanocomposite was investigated using differential thermal analysis. A model-free methodwas applied to the non-isothermal differential calorimetry (DSC) data to evaluate the reaction kineticsaccording to the Starink method. The activation energy of the thermit...

متن کامل

Synthesis and liquid phase sintering of TiN/TiB2/Fe–Cr–Ni nanocomposite powder

Nanostructured TiN/TiB2/Fe–Cr–Ni composite powder has been prepared via high energy ball milling. Ti and BN powders are reacted to form uniform mixture of TiN and TiB2 within 2 h of milling by a mechanically activated self-sustaining reaction (MSR). The crystallite sizes of TiN nd TiB2 are about 7 and 16 nm, respectively, after 32 h of milling. Through liquid phase sintering and optimizing the ...

متن کامل

Characterization of Nanosized Al2O3 Powder Synthesized by Thermal-Assisted MOCVD and Plasma-Assisted MOCVD

Nanosized Al2O3 powder is synthesized by thermal Metal Organic Chemical Vapor Deposition (MOCVD)combined withplasma. The effects of reaction temperature, pressure, Al(CH3)3 (TMA) concentration and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Australian Ceramic Society

سال: 2021

ISSN: ['2510-1579', '2510-1560']

DOI: https://doi.org/10.1007/s41779-021-00581-6