Correction: Characteristics of Base Drag and Flow with Nozzle Flow Conditions in Supersonic Flow
نویسندگان
چکیده
منابع مشابه
Shock Motion and Flow Instabilities in Supersonic Nozzle Flow Separation
This study evaluates the role of shock wave motion on the instability of the plume exiting an over-expanded, convergent-divergent nozzle. An array of wall pressure transducers was used to track the position of the shock in time, and a Pitot probe was used to obtain simultaneous measurement of the total pressure fluctuations at various points in the jet that emerges from the separation shock. An...
متن کاملControl of Nozzle Flow Using Microjets at Supersonic Mach Regime
This article reports the active control of base flows using the experimental procedure. Active control of base pressure helps in reducing the base drag in aerodynamic devices having suddenly expanded flows. Active control in the form of microjets having 0.5 mm radius placed at forty-five degrees apart is employed to control the base pressure. The Mach numbers of the present analysis are 1.7, 2....
متن کاملUnsteady Phenomena in Supersonic Nozzle Flow Separation
This work considers the instability of the jet plume from an overexpanded, shockcontaining convergent-divergent nozzle and attempts to correlate this instability to internal shock-induced separation phenomena. Time resolved wall pressure measurements and Pitot measurements are used as primary diagnostics. For the conditions of this study flow separation is asymmetric resulting in a large separa...
متن کاملNumerical Investigation of Supersonic Nozzle Flow Separation
S EPARATION of supersonic flow in a convergent–divergent nozzle is a fundamental fluid phenomenon that affects a large variety of applications, from fuel systems to aircraft engine nozzles. When a supersonic nozzle is operated at pressure ratioswell below its design point, a shock forms inside the nozzle andflowdownstreamof the shock separates from the nozzle walls. Even though flow separation ...
متن کاملPlasma-based Control of Supersonic Nozzle Flow
The flow structure obtained when Localized Arc Filament Plasma Actuators (LAFPA) are employed to control the flow issuing from a perfectly expanded Mach 1.3 nozzle is elucidated by visualizing coherent structures obtained from Implicit Large-Eddy Simulations. The computations reproduce recent experimental observations at the Ohio State University to influence the acoustic and mixing properties ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Aeronautical and Space Sciences
سال: 2022
ISSN: ['2093-274X', '2093-2480']
DOI: https://doi.org/10.1007/s42405-022-00528-6