Corrected Nordheim's Rule in high concentration Al-Mg solid solution.

Experimental and computational creep characterization of Al–Mg solid-solution alloy through instrumented indentation

Carefully designed indentation creep experiments and detailed finite-element computations were carried out in order to establish a robust and systematic method to extract creep properties accurately during indentation creep tests. Samples made from an Al–5.3mol%Mg solid-solution alloy were tested at temperatures ranging from 573 to 773K. Finite-element simulations confirmed that, for a power-la...

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY

The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...

Al-7Si-Mg Semi-Solid Castings – Microstructure and Mechanical Properties

Mössbauer Spectroscopy of Olivines across the Mg-fe Solid Solution

Introduction: Olivine is a major mineral component on terrestrial planetary surfaces and, therefore, it is important to understand its spectroscopic characteristics at all wavelengths. Here we present a detailed Mössbauer study of ten synthetic olivines in the fayalite-forsterite series in the interest of answering the following questions: 1. What are the Mössbauer parameters corresponding to t...

Synthesis ratios of Mg-Al and Zn-Al layered double hydroxides efficiency and selectivity in nitrate removal from solution

Four diverse chlorides layered double hydroxides with diverse ratios, i.e. Mg-Al (3:1), Mg-Al (4:1), Zn-Al (4:1), and Zn-Al (3:1) LDHs, were prepared to evaluate their efficiency and selectivity towards nitrate removal from aquatic solutions. A batch experiment was done at the initial nitrate concentration of 5-1000 mg/L, pH 5 to 12, and contact time of 5-180 min. Isotherms of nitrate adsorptio...