Cork–polymer biocomposites: Mechanical, structural and thermal properties
نویسندگان
چکیده
منابع مشابه
Epoxidized vegetable oils plasticized poly(lactic acid) biocomposites: mechanical, thermal and morphology properties.
Plasticized poly(lactic acid) PLA with epoxidized vegetable oils (EVO) were prepared using a melt blending method to improve the ductility of PLA. The plasticization of the PLA with EVO lowers the Tg as well as cold-crystallization temperature. The tensile properties demonstrated that the addition of EVO to PLA led to an increase of elongation at break, but a decrease of tensile modulus. Plasti...
متن کاملBiocomposites based on plasticized starch: thermal and mechanical behaviours
The paper is focusses on the study of the thermal and mechanical behaviour of reinforced agro-materials. Various formulations based on plasticized starch matrix have been carried out, varying matrix formulation, filler content, fibres length and nature. Cellulose and lignocellulose fibres, which show unequal surface tensions, have been tested. After extrusion and injection moulding, the propert...
متن کاملBiodegradable kefiran-chitosan-nanocellulose blend film: Production and physical, barrier, mechanical, thermal, and structural properties
In this study, biodegradable kefiran-chitosan-nanocellulose blend films were developed and their physical, mechanical, barrier, thermal and structural properties determined. Results showed that adding nanocellulose had not any significant effect on the thickness, moisture content and water solubility. Also, water vapor permeability, tensile strength and lightness increased and the elongation at...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMechanical and Morphological Properties of Kenaf Cellulose/LDPE Biocomposites
The possibility of using cellulose from the cell walls of kenaf, an annual herbaceous crop, for the production of bicomposites was investigated in this study. The composites were prepared using LDPE, as a matrix, the extracted cellulose, as filler and PEG as a plasticizer. The characterization of biocomposites was then performed with optimized thermo-mechanical properties and propensity to envi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2015
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2015.05.040