Cork Liquefaction for Polyurethane Foam Production
نویسندگان
چکیده
منابع مشابه
Producing Lignin-Based Polyols through Microwave-Assisted Liquefaction for Rigid Polyurethane Foam Production
Lignin-based polyols were synthesized through microwave-assisted liquefaction under different microwave heating times (5-30 min). The liquefaction reactions were carried out using polyethylene glycol (PEG-400)/glycerol as liquefying solvents and 97 wt% sulfur acid as a catalyst at 140 °C. The polyols obtained were analyzed for their yield, composition and structural characteristics using gel pe...
متن کاملImmobilization of Streptomyces gulbargensis in Polyurethane Foam: A Promising Technique for L-asparaginase Production on
In the present study, Streptomyces gulbargensis and its mutant form, S.gulbargensis mu24, immobilized on polyurethane foam were investigated for the production of L-asparaginase using groundnut cake extract as medium. The medium with an initial pH of 8.5 was inoculated with free and immobilized cells separately and then subjected to fermentation by incubation at 40oC and shaking at 200 rev/min....
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملBiological monitoring of TDI-derived amines in polyurethane foam production.
BACKGROUND Toluene diisocyanate (TDI) is used in industry in the production of flexible polyurethane foam, commonly a mixture of the 2,4- and 2,6- isomers. The production process may lead to exposure to diisocyanates which are associated with respiratory disease. A method has been available for the determination of TDI biomarkers in urine for some years. AIMS To explore the usefulness of urin...
متن کاملRapid Liquefaction of Wood in Polyhydric Alcohols Under Microwave Heating and its Liquefied Products for Preparation of Rigid Polyurethane Foam
Comparing to the conventional bath heating, the effects of liquefaction parameters on the degree of liquefaction of wood in polyhydric alcohols by using microwave as an energy source were evaluated. Polyurethane foams were successfully prepared from the liquefied biomass-based polyols. The effects of heating methods (conventional bath heating and microwave) and liquefaction reaction time on the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2017
ISSN: 1930-2126
DOI: 10.15376/biores.12.2.2339-2353