CoPSe: A New Ternary Anode Material for Stable and High?Rate Sodium/Potassium?Ion Batteries

نویسندگان

چکیده

The exploration of ideal electrode materials overcoming the critical problems large volume changes and sluggish redox kinetics induced by ionic radius Na+/K+ ions is highly desirable for sodium/potassium-ion batteries (SIBs/PIBs) toward large-scale applications. present work demonstrates that single-phase ternary cobalt phosphoselenide (CoPSe) in form nanoparticles embedded a layered metal–organic framework (MOF)-derived N-doped carbon matrix (CoPSe/NC) represents an ultrastable high-rate anode material SIBs/PIBs. CoPSe/NC fabricated using MOF as both template precursor, coupled with situ synchronous phosphorization/selenization reactions. CoPSe holds set intrinsic merits such lower mechanical stress, enhanced reaction kinetics, well higher theoretical capacity discharge voltage relative to its counterpart CoSe2, suppressed shuttle effect electrical conductivity CoPS. involved mechanisms are evidenced substantial characterizations density functional theory (DFT) calculations. Consequently, shows outstanding long-cycle stability rate performance SIBs PIBs. Moreover, CoPSe/NC-based Na-ion full cell can achieve energy 274 Wh kg?1, surpassing based on CoSe2/NC most state-of-the-art cells P-, Se-, or S-containing binary/ternary anodes date.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Amorphous cobalt silicate nanobelts@carbon composites as a stable anode material for lithium ion batteries.

During the past decade, tremendous attention has been given to the development of new electrode materials with high capacity to meet the requirements of electrode materials with high energy density in lithium ion batteries. Very recently, cobalt silicate has been proposed as a new type of high capacity anode material for lithium ion batteries. However, the bulky cobalt silicate demonstrates lim...

متن کامل

Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries

Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...

متن کامل

NaTiO2: a layered anode material for sodium-ion batteries

Lithium-ion batteries are currently the energy storage technology of choice in portable electronic devices and electric vehicles. In recent years, sodium-ion batteries have been actively restudied as a promising alternative because of the abundance of sodium resources and the high capacity cathodes available. But as graphitic carbon can not be used as anode material, as it is in lithium batteri...

متن کامل

A new, cheap, and productive FeP anode material for sodium-ion batteries.

A novel and low-cost FeP anode with a high capacity of 764.7 mA h g(-1) synthesized by a ball-milling method is reported for sodium ion batteries. Ex situ X-ray diffraction and transmission electron microscopy have been used to explore the sodium storage mechanism of FeP.

متن کامل

Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries

In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advanced Materials

سال: 2021

ISSN: ['1521-4095', '0935-9648']

DOI: https://doi.org/10.1002/adma.202007262