COPPER THIN FILM SPUTTERED ON AISI 316L FOR ANTIMICROBIAL PROPERTY
نویسندگان
چکیده
منابع مشابه
Friction-corrosion of AISI 316L/bone cement and AISI 316L/PMMA contacts : ionic strength effect on tribological behaviour
Wear phenomena understanding of implants is a challenge: friction-corrosion of biomaterials, which constitute orthopaedic implants, is a significant issue concerning the aseptic loosening. This work aims at studying AISI 316L/bone cement friction which is a tribological problem related to hip joint cemented prostheses. This study focuses on the ionic strength effect on the tribological behaviou...
متن کاملTransparent Thin-Film Transistors Based on Sputtered Electric Double Layer
Electric-double-layer (EDL) thin-film transistors (TFTs) have attracted much attention due to their low operation voltages. Recently, EDL TFTs gated with radio frequency (RF) magnetron sputtered SiO₂ have been developed which is compatible to large-area electronics fabrication. In this work, fully transparent Indium-Gallium-Zinc-Oxide-based EDL TFTs on glass substrates have been fabricated at r...
متن کاملSputtered Modified Barium Titanate for Thin-Film Capacitor Applications
New apparatus and a new process for the sputter deposition of modified barium titanate thin-films were developed. Films were deposited at temperatures up to 900 °C from a Ba₀.96Ca0.04Ti0.82Zr0.18O₃ (BCZTO) target directly onto Si, Ni and Pt surfaces and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Film texture and cryst...
متن کاملBiomaterial Studies on AISI 316L Stainless Steel after Magnetoelectropolishing
The polarisation characteristics of the electropolishing process in a magnetic field (MEP – magnetoelectropolishing), in comparison with those obtained under standard/conventional process (EP) conditions, have been obtained. The occurrence of an EP plateau has been observed in view of the optimization of MEP process. Up-to-date stainless steel surface studies always indicated some amount of fre...
متن کاملCopper–titanium thin film interaction
Interaction between 5 lm thick copper and 50 nm thin titanium films was investigated as a function of annealing temperature and time using MeV He Rutherford backscattering, X-ray diffraction and dynamic Secondary Ion Mass Spectrometry. Samples were made by depositing 10 nm of titanium on a PECVD silicon oxynitride, followed by 50 nm of titanium nitride and 50 nm of titanium in the said order. I...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Science and Engineering Applications
سال: 2013
ISSN: 2319-7560
DOI: 10.7753/ijseancrtam.1018