Copper-based Composite Materials Reinforced with Carbon Nanostructures

Carbon Nanotube Reinforced Alumina Composite Materials

Carbon Nanofiber Reinforced Carbon/Polymer Composite

Conventional carbon fiber reinforced phenolic resins are widely used to prepare carbon/carbon composites due to their high carbon yield. Property enhancement of carbon fabric/phenolic composites is possible through carbon nanomaterial dispersion in the matrix. The effect of carbon nanofiber dispersion in phenolic resins/carbon fabric composites was investigated. The dispersion efficiency in dif...

The effect of van der Waals-based interface cohesive law on carbon nanotube-reinforced composite materials

The nonlinear cohesive law derived from the weak van der Waals force for carbon nanotube/polymer interfaces is incorporated in present study of CNT-reinforced composites. Carbon nanotubes can indeed improve the mechanical behavior of composite at the small strain, but such improvement disappears at relatively large strain because the completely debonded nanotubes behave like voids in the matrix...

Design of Particulate-Reinforced Composite Materials

A microstructure-based model is developed to study the effective anisotropic properties (magnetic, dielectric or thermal) of two-phase particle-filled composites. The Green's function technique and the effective field method are used to theoretically derive the homogenized (averaged) properties for a representative volume element containing isolated inclusion and infinite, chain-structured part...

Machining of Fibre Reinforced Plastic Composite Materials

Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...