Copper Alloy's Cathodic Protection Against Cavitation Erosion in Seawater

Cavitation erosion of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys

Purpose: Purpose of this paper is attempt explanation how laser beam processing influence on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds of investigated alloys were tested for three cases: after laser...

Cavitation erosion behaviour of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys

Purpose: Purpose of this paper is investigation of influence of the surface processing by laser method on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds were tested for three cases: without additional pr...

The Volume Factor in Cavitation Erosion

Use of jet cavitation, however, occurs through an exit nozzle whose diameter can be changed, thereby changing volume with changing velocity. The results of such a change is shown to tie cavitation damage more powerfully to volume flow than to velocity. A specific example is in cavitation erosion of a high strength igneous rock which remained virtually undamaged at 70 MPa driving pressure but wa...

Comparison of cavitation erosion rate with liquid impingement erosion rate

Both cavitation erosion and liquid impingement erosion are phenomena that can cause pipe wall thinning in power plants. The Code for Power Generation Facilities, Rules on Pipe Wall Thinning Management, was published by the JSME (Japan Society of Mechanical Engineers) in 2005. The code says that cavitation erosion shall be prevented either in the design stage or by daily inspection. On the other...

Maintenance of Cathodic Protection Systems