Copper Adsorption on Lignin for the Removal of Hydrogen Sulfide
نویسندگان
چکیده
منابع مشابه
The Performance of Compost Biofilter for Hydrogen Sulfide Removal from Contaminated Air
In order to evaluate the performance of biofilter for H2S removal from contaminated air, a 120×14 cm column biofilter was constructed using clear polyacrylic material in conjunction with H2S production and control systems. The column was divided into four stages using perforated plates. The column was packed with a mixture of mushroom compost and snail shell (4:1).
 The performance of biofil...
متن کاملThe Performance of Compost Biofilter for Hydrogen Sulfide Removal from Contaminated Air
In order to evaluate the performance of biofilter for H2S removal from contaminated air, a 120×14 cm column biofilter was constructed using clear polyacrylic material in conjunction with H2S production and control systems. The column was divided into four stages using perforated plates. The column was packed with a mixture of mushroom compost and snail shell (4:1). The performance of biofilte...
متن کاملAdsorption of Hydrogen Sulfide at low temperature
From an ecological perspective is biogas an important source of energy. It is produced from fermentation of organic material, e.g. household waste and wastewater sludge. The composition of the gas depends on the raw material and varies between 65-85% methane, 15-35% carbon dioxide and small amounts of ammonia and hydrogen sulfide. To use the biogas it is important to purify it from hydrogen sul...
متن کامل“the effect of risk aversion on the demand for life insurance: the case of iranian life insurance market”
abstract: about 60% of total premium of insurance industry is pertained?to life policies in the world; while the life insurance total premium in iran is less than 6% of total premium in insurance industry in 2008 (sigma, no 3/2009). among the reasons that discourage the life insurance industry is the problem of adverse selection. adverse selection theory describes a situation where the inf...
15 صفحه اولEffect of hydrogen-sulfide on the hydrogen permeance of palladium–copper alloys at elevated temperatures
The hydrogen permeance of several 0.1 mm thick Pd–Cu alloy foils (80 wt.% Pd–20 wt.% Cu, 60 wt.% Pd–40 wt.% Cu and 53 wt.% Pd–47 wt.% Cu) was evaluated using transient flux measurements at temperatures ranging from 603 to 1123 K and pressures up to 620 kPa both in the presence and absence of 1000 ppm H2S. Sulfur resistance, as evidenced by no significant change in permeance, was correlated with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Molecules
سال: 2020
ISSN: 1420-3049
DOI: 10.3390/molecules25235577