COOLING ENVIRONMENT IMPACT AT CHROMIUM-NICKEL ALLOY THERMAL IMPULSE QUENCHING FOR ALTERNATING MICROSTRESSES
نویسندگان
چکیده
منابع مشابه
Effect of tantalum additions to a cobalt-chromium-nickel base alloy.
The effect of additions of tantalum (Ta) to a 40-30-30 cobalt (Co) -chromium (Cr) nickel (Ni) alloy has been studied for several years at the University of Michigan. Mechanical properties of a series of these alloys have been reported by Mohammed and Asgar.1 Those results showed that an alloy containing 13% Ta would have an ultimate tensile strength of 124,000 psi, a yield strength of 90,000 ps...
متن کاملThe three dimensional distribution of chromium and nickel alloy welding fumes.
In the present study, the fumes generated from manual metal arc (MMA) and submerged metal arc (SMA) welding of low temperature service steel, and the chromium and nickel percentages in these fumes, were measured at various horizontal distances and vertical heights from the arc in order to obtain a three dimensional distribution. The MMA welding fume concentrations were significantly higher than...
متن کاملEvaluation of Bond Strength of Pressed and Layered Veneering Ceramics to Nickel-Chromium Alloy
STATEMENT OF THE PROBLEM The success of metal- ceramic- restorations (MCR) depends on the presence of strong bond between porcelain and metal substructure. PURPOSE The purpose of this study was to evaluate the effect of hot pressing technique on the bond strength of a metal-porcelain composite in comparison to layering technique. MATERIALS AND METHOD Thirty Nickel-Chromium specimens were pr...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کاملThe cooling process in gas quenching
Gas quenching is a relatively new process with several important advantages, such as minimal environmental impact, clean products, and ability to control the cooling locally and temporally for best product properties. To meet the high cooling rates required for quenching, the cooling gas must flow at very high velocities, and such flows are highly turbulent and separated. Consequently, there is...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy
سال: 2015
ISSN: 2410-2091,0368-0797
DOI: 10.17073/0368-0797-2013-5-69-70