Cooling condition dependent hall coefficient of Cu-Zr glassy alloy.
نویسندگان
چکیده
منابع مشابه
Formation, Thermal Stability and Mechanical Properties of Cu-Zr and Cu-Hf Binary Glassy Alloy Rods
Glassy alloy rods with diameters up to 1.5mm exhibiting a large supercooled liquid region before crystallization and high mechanical strength were formed in Cu-Zr and Cu-Hf binary alloy systems by the copper mold casting method. The large supercooled liquid region exceeding 40K was obtained in the composition range of 30 to 70 at%Zr and 35 to 60 at%Hf. The largest value of the supercooled liqui...
متن کاملProduction of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE)
This study focused on the effect of electro slag remelting process (ESR) on microstructure and composition of an as-cast alloy of Cu-Cr-Zr. These observations revealed that applying ESR process results in a more uniform distribution of alloying elements, however a slight aggregation of large precipitates and inclusions existed in as-cast ingot was found. Additionally, impurities like P, S and M...
متن کاملCorrosion Fatigue Studies on a Bulk Glassy Zr-Based Alloy under Three-Point Bending
Corrosion fatigue (CF) tests were carried out on bulk glassy Zr52.5Cu17.9Al10Ni14.6Ti5 (Vitreloy 105) samples under load-controlled three-point bending conditions with a load ratio of R = 0.1 in 0.01 M Na2SO4 + 0.01 M NaCl electrolyte. During cyclic testing, the bar-shaped specimens were polarized in situ at constant potentials and the current was monitored. Three different anodic potentials wi...
متن کاملEnhancement of Plasticity of Highly Density-Fluctuated Cu-Zr Amorphous Alloy
This study explores the plastic deformability of highly density-fluctuated states due to the different thermal quenching process of the binary amorphous metals, Zr67Cu33, with embedded nanocrystals, Zr2Cu. To know the effect of local structural fluctuation, we prepare 5 computational models with Zr2Cu-nanocrystals that undergo rapid heat up and cool down. The region of nanocrystals is correspon...
متن کاملEFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
Microsegregation is one of the most important phenomena occurs during solidification. It usually results in formation of some unexpected second phases which generally affect the mechanical properties and specially reduce the workability of casting products. The aim of this research is to study the effect of cooling rate and grain refinement on the microsegregation in Al-4.8 wt.% Cu. For this p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Science
سال: 1994
ISSN: 1881-3917,0915-5651
DOI: 10.2978/jsas.6.22