Cooling Characteristics of the Twin-Roll Rapid Solidification Process
نویسندگان
چکیده
منابع مشابه
MODELING OF RAPID SOLIDIFICATION PROCESS IN THE GAS ATOMIZATION OF MOLTEN METALS
In the present work, a model was proposed to predict the thermal history during rapid solidification (RS) of metal droplets in the gas atomization process. The classical theory of heterogeneous nucleation was based on Newtonian heat flow and enthalpy method. Solving the governing numerical equations by the finite difference method (FDM) gave up the opportunity of analyzing the temperature-time ...
متن کاملControl Technology of Solidification and Cooling in the Process of Continuous Casting of Steel
متن کامل
INVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS OF AL/NANO SiO2NANOCOMPOSITES PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS
Accumulative roll-bonding process (ARB) is an important severe plastic deformation technique for production of the ultrafine grained, nanostructured and nanocomposite materials in the form of plates and sheets. In the present work, this process used for manufacturing Al/SiO 2 nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO 2 particles, at ambient temperature. After 8 cycle...
متن کاملRapid Solidification of Polymeric Fibers
A thorough understanding of crystallization kinetics for rapid polymer solidification during the fiber spinning process is a route to maximizing fiber properties while increasing production speeds. We are using theoretical, computational, and experimental models to characterize the crystallization process at the molecular, microscopic, and macroscopic levels. Polymer dependent molecular descrip...
متن کاملChanges in Solidification Mode, and the Measurement of Cooling Rates following Solidification during Arc Welding
The solidification process in a weld pool has been shown to have a considerable influence upon the properties of the resultant weld. It influences the development of microstructure (Edvardsson et al., 1976), and determines the distribution of alloying elements, and hence the homogeneity of the weld. Previous work on the cooling behaviour of welds (Garland and Kirkwood, 1974; Svensson et al., 19...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Institute of Metals
سال: 1983
ISSN: 0021-4434,2432-4701
DOI: 10.2320/matertrans1960.24.696