Controlling the Structure of Hydroxyapatite Ceramics with Dual Pores Prepared Using Freeze-Casting
نویسندگان
چکیده
منابع مشابه
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering.
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze casting can be applied to s...
متن کاملThe Production of Porous Hydroxyapatite Scaffolds with Graded Porosity by Sequential Freeze-Casting
Porous hydroxyapatite (HA) scaffolds with porosity-graded structures were fabricated by sequential freeze-casting. The pore structures, compressive strengths, and biocompatibilities of the fabricated porous HA scaffolds were evaluated. The porosities of the inner and outer layers of the graded HA scaffolds were controlled by adjusting the initial HA contents of the casting slurries. The interfa...
متن کاملRoom-Temperature Freeze Casting for Ceramics with Nonaqueous Sublimable Vehicles in the Naphthalene–Camphor Eutectic System
Freeze casting for Al2O3 was accomplished at room temperature with nonaqueous sublimable vehicles in the naphthalene– camphor eutectic system with a eutectic temperature of 31°C. A fully dense sintered body (>99.5% of theoretical density (T.D.)) was obtained with a eutectic composition vehicle, whereas at most 90% T.D. was obtained with an off-eutectic (i.e., hypoor hypereutectic) composition v...
متن کاملReverse freeze casting: a new method for fabricating highly porous titanium scaffolds with aligned large pores.
Highly porous titanium with aligned large pores up to 500 μm in size, which is suitable for scaffold applications, was successfully fabricated using the reverse freeze casting method. In this process we have newly developed, the Ti powders migrated spontaneously along the pre-aligned camphene boundaries at a temperature of 45.5°C and formed a titanium-camphene mixture with an aligned structure;...
متن کاملNumerical Study on Parameters Affecting the Structure of Scaffolds Prepared by Freeze-Drying Method
Freeze-drying is one of the most used methods for preparing scaffolds and is very sensitive to the material and operational parameters such as nucleation temperature, thermal properties of the mold, cooling rate, set freezing point, and slurry height. In the present study, a Finite Element Method (FEM) based code was developed to investigate the effects of such parameters and to eventually ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nanotechnology
سال: 2018
ISSN: 1687-9503,1687-9511
DOI: 10.1155/2018/7531464