Controlled titration-based ZnO formation

Implantation Damage Formation in GaN and ZnO

Dimethylamine Controlled Sol-Gel Process to Grow ZnO Nanorods

ZnO nanorods were prepared using dimethylamine (DMA) controlled Sol-Gel process. Dimethylamine was added as an additive to control the sol-gel process for growing ZnO nanorods. DMA would exhibit stabilizing effect, promote dissolution of precursor and control the rate of sol-gel reactions because of its basic nature and significant miscibility. The Structural and microstructural properties of t...

ZnO-Based Ultraviolet Photodetectors

Ultraviolet (UV) photodetection has drawn a great deal of attention in recent years due to a wide range of civil and military applications. Because of its wide band gap, low cost, strong radiation hardness and high chemical stability, ZnO are regarded as one of the most promising candidates for UV photodetectors. Additionally, doping in ZnO with Mg elements can adjust the bandgap largely and ma...

ZnO tetrapod - based sensor

Transferable ZnO tetrapods were grown by an aqueous solution method. An individual ZnO tetrapod-based sensor was fabricated by in situ lift-out technique and its ultraviolet (UV) and gas sensing properties were investigated. This single tetrapod-based device responds to the UV light rapidly and showed a recovery time of about 23 s. The sensitivity of a single ZnO tetrapod sensor to oxygen conce...

ARM - Based Automatic Potentiometric Titration System

Accurate measurement and analysis are very important tasks for many applications ranging from industrial operations, analytical laboratories to biological processes. In modern analytical chemistry, automatic titrators have more prominence than manual interpretations. Various instruments have been developed and proposed in the past to carry out potentiometric titrations. Also there are suppliers...