Controlled Gas Carburizing Process for SCr420 Steel
نویسندگان
چکیده
منابع مشابه
Gas and Vacuum Carburizing
The solution algorithm used in CarbTool is based on the finite difference method (FDM), and the code is developed using Microsoft Visual C++ in Window OS. The tool has been built on the concept of the carbon flux at the surface between the gas and steel is to be specified by the user. The outputs of CarbTool are the carbon concentration distribution profile inside the steel part and the surfa...
متن کاملThermodynamic Simulation of Gas Carburizing of Steels
Simulation of metallurgical processes has been the subject of intense research due to the reduced number of experiments required for controlling the process as well as time and energy savings it allows. In gas carburizing of steel parts, the amount of carbon at the surface of carburized parts is the most important specification of the process in terms of achieving the desired metallurgica...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملthermodynamic simulation of gas carburizing of steels
simulation of metallurgical processes has been the subject of intense research due to the reduced number of experiments required for controlling the process as well as time and energy savings it allows. in gas carburizing of steel parts, the amount of carbon at the surface of carburized parts is the most important specification of the process in terms of achieving the desired metallurgical prop...
متن کاملCarbonitriding – fundamentals, modeling and process optimization
The carbonitriding process, which involves the diffusion of both carbon and nitrogen into the base steel, can be carried out in a salt bath or in a furnace gas atmosphere. It is a modified carburizing process but is mostly done at a lower temperature and for shorter time than carburizing. This process is one of the widely used heat treatments for surface hardening. Nonetheless, there are challe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1988
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.52.5_495