Controllable Li <sub>3</sub> PS <sub>4</sub> –Li <sub>4</sub> SnS <sub>4</sub> solid electrolytes with affordable conductor and high conductivity for solid?state battery
نویسندگان
چکیده
High ionic conductivity, low grain boundary impedance, and stable electrochemical property have become the focus for all-solid-state lithium–sulfur batteries (ASSLSB). One of approaches is to promote rapid diffusion lithium ions by regulating chemical bond interactions within framework. The structure control P5+ substitution Sn4+ on lithium-ion transport was explored a series Li3PS4–Li4SnS4 glass–ceramic electrolytes. Results showed that impedance glass electrolyte reduced after heat treatments. formation LiSnPS microcrystals, good superionic conductor, detected X-ray diffraction tests. Electrochemical experiments obtained highest conductivity 29.5 S cm?1 at 100°C window from –0.1 5 V 25°C. In addition, cell battery assembled with prepared electrolyte, which promoted as candidate solid material improved performance ASSLSB.
منابع مشابه
Novel semi-solid electrolytes for Li-based batteries
Electrolytes of relevance for high performance batteries have to fulfill a variety of restrictive criteria: Not only is high Li conductivity a necessary condition to avoid too high losses, also an anion contribution as low as possible is desired as otherwise concentration polarization occurs [1]. Furthermore, the electrolyte should be mechanically stable. Beyond that, it should wet the electrod...
متن کاملA Rechargeable Li-Air Fuel Cell Battery Based on Garnet Solid Electrolytes
Non-aqueous Li-air batteries have been intensively studied in the past few years for their theoretically super-high energy density. However, they cannot operate properly in real air because they contain highly unstable and volatile electrolytes. Here, we report the fabrication of solid-state Li-air batteries using garnet (i.e., Li6.4La3Zr1.4Ta0.6O12, LLZTO) ceramic disks with high density and i...
متن کاملHigh Performance C/S Composite Cathodes with Conventional Carbonate-Based Electrolytes in Li-S Battery
High stable C/S composites are fabricated by a novel high-temperature sulfur infusion into micro-mesoporous carbon method following with solvent cleaning treatment. The C/S composite cathodes show high Coulombic efficiency, long cycling stability and good rate capability in the electrolyte of 1.0 M LiPF6 + EC/DEC (1:1 v/v), for instance, the reversible capacity of the treated C/S-50 (50% S) cat...
متن کاملSeparators for Li-Ion and Li-Metal Battery Including Ionic Liquid Based Electrolytes Based on the TFSI− and FSI− Anions
The characterization of separators for Li-ion or Li-metal batteries incorporating hydrophobic ionic liquid electrolytes is reported herein. Ionic liquids made of N-butyl-N-methylpyrrolidinium (PYR14+) or N-methoxyethyl-N-methylpyrrolidinium (PYR12O1+), paired with bis(trifluoromethanesulfonyl)imide (TFSI-) or bis(fluorosulfonyl)imide (FSI-) anions, were tested in combination with separators hav...
متن کاملDoped sulfone electrolytes for high voltage Li-ion cell applications
We show that, with appropriate doping, the ethersulfone-based electrolytes that we earlier reported to have 5.6 V electrochemical windows but poor cycling performance in Li-ion cells, can succeed. We show they can be used to make cells that, at C/20 charge/discharge rates, have cycling performance equal to those with the standard LiPF6-carbonate electrolytes. A difference in performance that de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 2022
ISSN: ['0002-7820', '1551-2916']
DOI: https://doi.org/10.1111/jace.18287