Control Technique of Solidus Temperature on Gold Base Solder for SiC Devices with High Temperature Operation
نویسندگان
چکیده
منابع مشابه
Pb-Free High Temperature Solder Joints for Power Semiconductor Devices
Three types of inexpensive Pb-free solder joints, namely Zn-based and Bi-based solders, and a CuSn alloy were studied for application to the high-temperature operation of wide band-gap power semiconductor devices using GaN or SiC. Zn– Al solder sheets, whose melting point is 380°C were prepared, and then surface oxides were removed by RF plasma etching. Subsequently, Cu thin films were deposite...
متن کاملHigh Temperature Power Electronics – Application Issues of SiC devices
High temperature operation capability of power devices enhances performance of the system especially in the automotive industry where weight and volume are critical factors. SiC devices are capable of operating at higher voltages, higher frequencies, and higher junction temperatures, which result in significant reduction in weight and size of the power converter and an increase in efficiency. I...
متن کاملSiC Field-Effect Devices Operating at High Temperature
Field-effect devices based on SiC metal-oxide-semiconductor (MOS) structures are attractive for electronic and sensing applications above 250°C. The MOS device operation in chemically corrosive, high-temperature environments places stringent demands on the stability of the insulating dielectric and the constituent interfaces within the structure. The primary mode of oxide breakdown under these ...
متن کاملA study on electro thermal response of SiC power module during high temperature operation
This paper focuses on using high temperature operating capability of SiC power devices, which are packaged in power modules. A SiC Schottky barrier diode is mounted on an active metal brazed Si3N4 substrate as a heat resistive power module. The temperature dependency of electrical characteristics of the SiC device and thermal dynamics of the power module are modeled for numerical electro therma...
متن کاملNovel Bi-based High-temperature Solder for Mounting Power Semiconductor Devices
Ni Bi3Ni Cu -40/250 Sn-Cu We have studied a novel high-temperature solder for mounting the power semiconductor devices used in the inverters of hybrid and fuelcell vehicles. The melting point of well-known lead-free solders such as Sn-based alloys is around 220 C, which is too low to allow their use with high-temperature compound power semiconductor devices such as those based on GaN and SiC. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Smart Processing
سال: 2014
ISSN: 2186-702X,2187-1337
DOI: 10.7791/jspmee.3.205